Description

Models

TruSet™ Tillage provides precise depth and pressure control from the cab on the go

Integrated TruSet Tillage technology enables field cultivator operators to adjust sweep depth and down pressure on the active hydraulic rolling baskets while on the go to respond to changing field conditions such as varying soils, heavier residue, and moisture.

With short window of time to perform tillage operations, TruSet can provide significant productivity improvements as operators are able to adjust the field cultivator while covering acres with the push of a button. By responding to conditions as they change throughout the field, TruSet enables operators to generate better-quality tillage performance with the first pass.

Using a GreenStar™ display, a user sees real-time data for sweep depth and basket down pressure for assurance of desired tillage outcomes. Once the actual set point is validated and configured to the display in the cab, operators are able to make independent adjustments as small as one tenth of an inch. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions.  

Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the 2230 Field Cultivators are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

Components

TruSet is compatible with John Deere and competitive tractors. Depending on the tractor, a compatibility kit may be needed in addition to the TruSet Tillage system. The following chart identifies the components needed to operate TruSet on a 2230LL or 2230FH Field Cultivator with a GreenStar ready tractor.

 

TruSet product	John Deere 30 Series and newer Tractors	John Deere 20 Series Tractors (large frame or IVT™ system)	John Deere 20 Series Tractors (small frame or non IVT)	John Deere 10 Series and older Tractors	Competitive tractors
TruSet Tillage system	Yes	Yes	Yes	Yes	Yes
TruSet compatibility kit	No	No	Yes	Yes	Yes

Both the TruSet Tillage system and the compatibility kit will be available as a field-installed option that can be ordered with the field cultivator or through aftermarket parts.

All model years of the 2230LL and 2230FH can be retrofitted with TruSet.

TruSet Tillage requires a GreenStar ready tractor with a supported display. The TruSet Tillage system must have a connection to the tractor ISO connection. Additional TruSet Tillage information:

• Tractor compatibility
• Display compatibility
• TruSet compatibility kit
• TruSet with side-to-side leveling

Wide range of working widths available to match acreage and horsepower requirements

At 16-km/h (10-mph) working speeds, the 2230LL can cover up to 29.5 hectares (73 acres) per hour enabling producers to size their implement for their unique productivity and agronomic needs.

The 2230LL is available in sizes ranging from 7.2 to 18.4 m (23 ft, 6 in. to 60 ft, 6 in.). Horsepower requirements range from 19.6 to 29.4 kW/m (8 to 12 hp-ft), depending on the soil, depth, and speed.

Three-section configurations

 

Working widths	Centerframe size	Productivity per hour at 16 km/h (10 mph)
7.16 m (23 ft, 6 in.)	2.74 m (9 ft)	11.3 hectares (28 acres)
7.77 m (25 ft, 6 in.)		12.5 hectares (31 acres)
8.38 m (27 ft, 6 in.)		13.6 hectares (33 acres)
8.99 m (29 ft, 6 in.)		14.6 hectares (36 acres)
9.60 m (31 ft, 6 in.)	3.35 m (11 ft)	15.4 hectares (38 acres)
10.21 m (33 ft, 6 in.)		16.6 hectares (41 acres)
10.82 m (35 ft, 6 in.)		17.4 hectares (43 acres)
11.73 m (38 ft, 6 in.) low transport	2.74 m (9 ft)	19.0 hectares (47 acres)
13.25 m (43 ft, 6 in.) low transport	3.35 m (11 ft)	21.4 hectares (53 acres)

 

 

Five-section configurations

Working widths	Centerframe size	Productivity per hour at 16 km/h (10 mph)
12.95 m (42 ft, 6 in.)	2.74 m (9 ft)	21.0 hectares (52 acres)
14.17 m (46 ft, 6 in.)		22.7 hectares (56 acres)
15.39 m (50 ft, 6 in.)		24.7 hectares (61 acres)
16.00 m (52 ft, 6 in.)	3.35 m (11 ft)	25.9 hectares (64 acres)
17.22 m (56 ft, 6 in.)		27.5 hectares (68 acres)
18.44 m (60 ft, 6 in.)		29.5 hectares (73 acres)

ProFinish™ Leveling System offers wide range of rear harrows to meet agronomic needs

The ProFinish Leveling System offers a wide range of rear harrows to meet agronomic needs.

Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2230 Field Cultivators.

Capabilities	4-bar coil-tine harrow	6-bar spike-tooth harrow	3-bar coil-tine with round-bar basket	3-bar coil-tine with flat-bar basket	3-bar spike-tooth with round-bar basket	3-bar spike-tooth with flat-bar basket
Level seedbed	Good	Better	Best	Best	Best	Best
Firm seedbed	Fair	Good	Best	Better	Best	Better
Handle residue	Best	Better	Best	Best	Better	Better
Break up clods	Good	Better	Better	Best	Better	Best
Handle moisture/wet soil	Best	Better	Good	Good	Good	Good
Handle rocks	Best	Good	Better	Good	Better	Good

 

Wing stabilizer wheels ensure steady and consistent operation

Wing stabilizer wheels are recommended when producers encounter rolling ground conditions, terraces, or when the tool is operated at speeds above 11 km/h (7 mph).

Stabilizer wheel options and quantities are dependent on the model.

 

On the 2230LL Level-lift™ Field Cultivator, two mechanical wing stabilizer wheels are included on the outer wings for all five-section configurations. Both three-section and five-section configurations have the option to add stabilizer wheels to the inner wings.

On the 2230FH Floating Hitch Field Cultivator, the 12.95-m (42-ft, 6-in.) low-transport configuration has the option of adding a pair of mechanical stabilizer wheels. The active-hydraulic castering wheels are included in base equipment for the inner and outer wings on the 2230FH.

Radial and bias-ply tire options are available for mechanical stabilizer wheels and active-hydraulic castering wheels.

NOTE:Not all tire options are available for all configurations.

Configuration		Mechanical stabilizer wheels		Active-hydraulic castering wheels
		Base quantity	Optional quantity	Base quantity	Optional quantity
2230LL	Three-section	---	2	---	---
	Five-section	2	2	---	---
	Low transport	---	2	---	---
2230FH	Three-section	---	---	4	---
	Five-section	---	---	6	---
	Low transport	---	2	4	---

		Radial Tire Sizes
		Main Frame	Wing Frame
2230LL	Three-section	N/A	IF280/80 R15 Six bolt
	Five-section	IF280/70 R15 Six bolt	IF280/70 R15 Six bolt
	Low transport	N/A	IF280/80 R15 Six bolt
2230FH	Three-section	IF280/70 R15 Six bolt	IF280/70 R15 Six bolt
	Five-section	IF320/70 R15 Eight bolt	IF320/70 R15 Six bolt
	Low transport	IF320/70 R15 Six bolt	IF320/70 R15 Six bolt

		Bias Tire Sizes
		Main Frame	Wing Frame
2230LL	Three-section	N/A	9.5L-15 LD D Six bolt
	Five-section	9.5L-15 LD D Six bolt	9.5L-15 LD D Six bolt
	Low transport	N/A	9.5L-15 LD D Six bolt
2230FH	Three-section	11L-15 FI LR D Six bolt	11L-15 FI LR D Six bolt
	Five-section	12.5L-15 FI LR F Eight bolt	12.5L-15 FI LR D Six bolt
	Low transport	12.5L-15 FI LR D Six bolt	12.5L-15 FI LR D Six bolt

True 152-mm (6-in.) split-the-middle spacing provides complete field coverage

Thanks to an updated frame design that enables true 152-mm (6-in.) split-the-middle shank spacing, the 2230 Field Cultivators can maintain consistent depth and evenly cover the field to achieve an optimal seedbed and manage weeds.

Seedbed preparation

Even at high speeds and in tough field conditions, the TruPosition C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.

These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.

Weed management

The even 152-mm (6-in.) split-the-middle shank spacing enables the 2230 Field Cultivator to minimize the potential of remaining strips of weeds that survive the tillage pass. With a field cultivator pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.

If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the field cultivator pass helps keep weed management costs under control and helps preserve crop yield potential.

Spacing options

152-mm (6-in.) shank spacing base equipment on the 2230LL and 2230FH. Additional options for implement customization include:

• 229-mm (9-in.) shank spacing
• 114-mm (4.5-in.) s-tine spacing (on select configurations)

Tillage documentation and prescription functionality included with TruSet™ Tillage

With integrated TruSet Tillage technology, 2230 Field Cultivator operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature will give producers the ability to capture and analyze the field cultivator pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

Operators can document data for the depth of their field cultivator sweeps along with rolling basket down pressure. By creating an as-applied map based off of global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the 2230 Field Cultivators. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that will command the implement to the desired depth and pressure settings for optimum agronomic results.

Agrian is a trademark of Agrian, Inc.

Rear hitch compatible with all 2230 configurations and rear harrows

A substantial rear hitch is available to give the 2230 the versatility to pull the 200 Seedbed Finisher or other rear attachments. The rear hitch includes:

• Rectangular tube construction
• Telescoping hitch
• Serviceable drawbar
• 453-kg (1000-lb) tongue weight rating
• 13,000 gross vehicle weight (GVW) rating for five-section machines; 10,000 gross vehicle weight (GVW) rating for three-section machines
• Wiring harness for transport lights
• Hydraulic hoses and couplers
• Higher load safety chain between tractor and implement

The rear hitch is fully compatible with all 2230 rear harrow configurations available in the ProFinish™ Leveling System.

Level-lift™ frame ensures even operation through all operating depths

The Level-lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.

The combination of the sweep and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.

The heavy-duty T-hitch allows for tighter turning, decreasing the amount of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.

Low-transport configurations available for 2230LL

Low power lines and bridges can be a concern when transporting equipment. The 2230 Field Cultivator lineup includes low-transport configurations as a solution for transportation concerns.

The 2230LL has two low-transport configurations. These implements fold like a five-section implement, but operate like a three-section implement for improved transportability thanks to the addition of small outer wings that lock rigid for field operation.

Another advantage of the low-transport models is operation over uneven terrain. The low-transport models allow for the rigid wing to follow the contour of the ground.

 

Working width	Transport height	Transport width
11.7 m (38 ft, 6 in.)	4.1 m (13 ft, 6 in.)	4.3 m (14 ft, 0 in.)
13.3 m (43 ft, 6 in.)	4.4 m (14 ft, 4 in.)	5.5 m (18 ft, 0 in.)

Specifications

• Centerframe depth control wheels and tires - 3-section: Option 1: (4) IF280/70 R15 134D tires<br/>Option 2: (4) IF280/70 R15 134D tires<br/>Option 3: (4) IF280/70 R15 134D tires<br/>Option 4: (4) IF280/70 R15 134D tires<br/>Option 5: (4) IF280/70 R15 134D tires<br/>Option 6: (4) IF280/70 R15 134D tires<br/>Option 7: (4) IF280/70 R15 134D tires<br/>Option 8: (4) IF320/70 R15 144D tires<br/>Option 9: (4) IF320/70 R15 144D tires
• Centerframe depth control wheels and tires - Type: Center frame tires on Walk-Over tandem wheels (bias-ply tire option available)
• Depth control - Options: Add TruSet™ in-cab depth/pressure control
• Depth control - Standard: Single-point depth control in base
• Electrical requirements - Options: If adding TruSet, tractor must be GreenStar™ system-ready
• Electrical requirements - Standard: 9-pin connector for warning lights
• Fold - Type: Over-center fold
• Frame - Fore-and-aft clearance: On 9-ft and 11-ft (2.7-m and 3.4-m) center frames: 134 in.<br/>3.4 m<br/>On 15-ft (4.6-m) center frames: 164 in.<br/>4.2 m
• Frame - Number of ranks: 3-section<br/>Option 1: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 2: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 3: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 4: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 5: 11-ft (3.35 m) center frame with 5-rank tube frame<br/>Option 6: 11-ft (3.35 m) center frame with 5-rank tube frame<br/>Option 7: 11-ft (3.35 m) center frame with 5-rank tube frame<br/>Option 8: 9-ft (2.74 m) center frame with 5-rank tube frame<br/>Option 9: 11-ft (3.35 m) center frame with 5-rank tube frame<br/>5-section<br/>Option 10: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 11: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 12: 9-ft (2.7-m) center frame with 5-rank tube frame<br/>Option 13: 11-ft (3.35 m) center frame with 5-rank tube frame<br/>Option 14: 11-ft (3.35 m) center frame with 6-rank tube frame<br/>Option 15: 11-ft (3.35 m) center frame with 6-rank tube frame<br/>
• Frame - Tubing: Rank tubes: 10.2x10.2 cm<br/>4x4 in.<br/>Center frame fore-aft tubes - For 5 rank: 5.1x15.2 cm<br/>2x6 in.<br/>Center frame fore-aft tubes - For 6 rank: 5.1x20.3 cm<br/>2x8 in.<br/>Wing fore-aft tubes: 5.1x15.2 cm
• Frame - Underframe clearance: 61 cm<br/>24 in.
• Ground-engaging components - Options: Wide variety of sweeps, shovels, and points
• Hitch - Type: Level-lift: 15.2x25.4 cm<br/>6x10 in.<br/>T-hitch, cast-steel hitch link, optional rear hitch
• Horsepower required - Horsepower per foot: 19.6 to 29.4 kW/m<br/>8 to 12 hp/ft
• Hydraulic requirements - Standard: 2 SCVs (lift and fold) at 17,237 kPa<br/>2,500 psi<br/>for optimum raise times, additional SCV needed for optional rolling basket down pressure
• Key Specs - 5-section: Option 10: 12.95 m (42.5 ft)<br/>Option 11: 14.17 m (46.5 ft)<br/>Option 12: 15.4 m (50.5 ft)<br/>Option 13: 16 m (52.5 ft)<br/>Option 14: 17.22 m (56.5 ft)<br/>Option 15: 18.44 m (60.5 ft)
• Key Specs - 5-section: Option 10: 3.83 m (12.58 ft)<br/>Option 11: 4.09 m (13.5 ft)<br/>Option 12: 4.37 m (14.33 ft)<br/>Option 13: 4.32 m (14.17 ft)<br/>Option 14: 4.62 m (15.17 ft)<br/>Option 15: 4.93 m (16.17 ft)
• Key Specs - 5-section: Option 10: 4.27 m (14 ft)<br/>Option 11: 4.27 m (14 ft)<br/>Option 12: 4.27 m (14 ft)<br/>Option 13: 4.9 m (16.08 ft)<br/>Option 14: 4.9 m (16.08 ft)<br/>Option 15: 4.9 m (16.08 ft)
• Key Specs - Horsepower per foot: 19.6 to 29.4 kW/m<br/>8 to 12 hp/ft
• Key Specs - Miles per hour: 10 to 16 km/h<br/>6 to 10 mph
• Key Specs - Operating depth - Inches: Up to 12.7 cm<br/>5 in.
• Key Specs - Rigid frame - 3-section: Option 1: 4.19 m (13.75 ft)<br/>Option 2: 4.19 m (13.75 ft)<br/>Option 3: 4.19 m (13.75 ft)<br/>Option 4: 4.19 m (13.75 ft)<br/>Option 5: 4.78 m (15.67 ft)<br/>Option 6: 4.78 m (15.67 ft)<br/>Option 7: 4.8 m (15.75 ft)<br/>Option 8: 4.27 m (14 ft)<br/>Option 9: 5.45 m (18 ft)
• Key Specs - Standard spacing - Inches: Split-the-middle 15.2 cm<br/>6 in.<br/>*22.9 cm<br/>9 in.<br/>and S-tine *11.4 cm<br/>4.5 in.<br/>options (*spacing may not be exact in all locations)
• Key Specs - Transport height (without rear harrow) - 3-section: Option 1: 3.43 m (11.25 ft)<br/>Option 2: 3.66 m (12 ft)<br/>Option 3: 3.94 m (12.92 ft)<br/>Option 4: 4.22 m (13.83 ft)<br/>Option 5: 4.24 m (13.92 ft)<br/>Option 6: 4.52 m (14.83 ft)<br/>Option 7: 4.8 m (15.75 ft)<br/>Option 8: 4.11 m (13.5 ft)<br/>Option 9: 4.37 m (14.33 ft)
• Key Specs - Working widths - 3-section: Option 1: 7.16 m (23.5 ft)<br/>Option 2: 7.77 m (25.5 ft)<br/>Option 3: 8.38 m (27.5 ft)<br/>Option 4: 8.99 m (29.5 ft)<br/>Option 5: 9.6 m (31.5 ft)<br/>Option 6: 10.2 m (33.5 ft)<br/>Option 7: 10.85 m (35.5 ft)<br/>Option 8: Low Transport - 11.73 m (38.5 ft)<br/>Option 9: Low Transport - 13.25 m (43.5 ft)
• Operating depth - Inches: Up to 12.7 cm<br/>5 in.
• Operating speed - Miles per hour: 10 to 16 km/h<br/>6 to 10 mph
• Rear attachments - Coil tine harrow option 1: Rank spacing<br/>38.1 cm<br/>15 in.<br/>Tine spacing<br/>22.9 cm<br/>9 in.<br/>Effective spacing<br/>5.72 cm<br/>2.25 in.<br/>Tine dimensions<br/>Length: 40.6 cm<br/>16 in.<br/>Angle<br/>36 to 75 degree (angle)<br/>Adjustments<br/>Tool-free four-position pin adjustments ranging from 36 to 75 degree (angle)<br/>4-bar coil-tine harrow
• Rear attachments - Coil tine harrow option 2: <br/><br/><br/>
• Rear attachments - Rolling basket harrow option 1: <br/>Rank spacing<br/>38.1 cm<br/>15 in.<br/>Effective spacing<br/>7.6 cm<br/>3 in.<br/>Spike/tine dimensions<br/>Length: 40.6 cm<br/>16 in.<br/>Basket diameter<br/>35.6 cm<br/>14 in.<br/>Bar type<br/>Round<br/>Bar size<br/>Round bar: 2.54 cm<br/>1 in.<br/>Wall thickness: 0.32 cm<br/>0.125 in.<br/>Bearings<br/>Maintenance free<br/>Adjustments<br/>Tool-free harrow adjustments ranging from 36 to 75 degree (angle)<br/>and hydraulically adjustable baskets up to 5,516 kPa<br/>800 psi<br/>3-bar coil-tine with round-bar basket
• Rear attachments - Rolling basket harrow option 2: <br/>Rank spacing<br/>38.1 cm<br/>15 in.<br/>Effective spacing<br/>7.6 cm<br/>3 in.<br/>Spike/tine dimensions<br/>Length: 40.6 cm<br/>16 in.<br/><br/>Bar type<br/>Flat<br/>Bar size<br/>3.81x0.64 cm<br/>1.5x0.25 in.<br/>Bearings<br/>Maintenance free<br/>Adjustments<br/>Tool-free harrow adjustments ranging from 36 to 75 degree (angle)<br/>and hydraulically adjustable baskets up to 5,516 kPa<br/>800 psi<br/>3-bar coil tine with flat-bar basket
• Rear attachments - Rolling basket harrow option 3: <br/>Spike/tine spacing<br/>26.7 cm<br/>10.5 in.<br/>Effective spacing<br/>4.45 cm<br/>1.75 in.<br/>Spike/tine dimensions<br/>1.9x1.9x30.5 cm<br/>0.75x0.75x12 in.<br/><br/><br/>Adjustments<br/>Tool-free harrow adjustments ranging from 23 to 51 degree (angle)<br/>and hydraulically adjustable baskets up to 5,516 kPa<br/>800 psi<br/>3-bar spike tooth with round-bar basket
• Rear attachments - Rolling basket harrow option 4: <br/>Spike/tine spacing<br/>26.7 cm<br/>10.5 in.<br/>Effective spacing<br/>4.45 cm<br/>1.75 in.<br/>Spike/tine dimensions<br/>1.9x1.9x30.5 cm<br/>0.75x0.75x12 in.<br/><br/><br/>Adjustments<br/>Tool-free harrow adjustments ranging from 23 to 51 degree (angle)<br/>and hydraulically adjustable baskets up to 5,516 kPa<br/>800 psi<br/>3-bar spike tooth with flat-bar basket
• Rear attachments - Spike tooth harrow option 1: Rank spacing<br/>30.5 cm<br/>12 in.<br/>Spike spacing<br/>26.7 cm<br/>10.5 in.<br/>Effective spacing<br/>3-bar: 8.89 cm<br/>3.5 in.<br/>6-bar: 4.45 cm<br/>1.75 in.<br/>Spike dimension<br/>1.9x1.9x30.5 cm<br/>0.75x0.75x12 in.<br/>Angle<br/>23 to 51 degree (angle)<br/>Adjustments<br/>Tool-free three-position pin adustment<br/>6-bar spike-tooth harrow
• Rear attachments - Spike tooth harrow option 2: <br/><br/><br/>
• Rear attachments - Spike tooth harrow option 3: <br/><br/><br/>
• Rear hitch - Hydraulic hoses and couplers: Two circuits provided
• Rear hitch - Tongue weight rating: Varies by working width<br/>Vertical weight: 680.4 kg<br/>1,500 lb
• Stabilizer wheels - 3-section: Option 1: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 2: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 3: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 4: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 5: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 6: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 7: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 8: Optional - (2) 9.5L-15 FI LR D tires<br/>Option 9: Optional - (2) 9.5L-15 FI LR D tires
• Stabilizer wheels - 5-section: Option 10: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 11: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 12: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 13: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 14: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 15: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 16: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires<br/>Option 17: Base - (2) 9.5L-15 FI LR D tires; optional additional (2) 9.5L-15 FI LR D tires
• Stabilizer wheels - Type: Mechanical stabilizer wheels and tires (radial tire option available)
• Standard options - Option 1: Spec<br/>1.9x4.45x61 cm<br/>0.75x1.75x24 in.<br/>Trip force<br/>90.7 kg<br/>200 lb<br/>Trip height<br/>25.4 cm<br/>10 in.<br/>Maximum operating depth<br/>12.7 cm<br/>5 in.<br/>Underframe clearance<br/>61 cm<br/>24 in.<br/>Spacing<br/>True 15.2 cm<br/>6 in.<br/>spilt-the-middle spacing<br/>TruPosition™ C-shank standard
• Standard options - Option 2: Spec<br/>1.59x4.45 cm<br/>0.625x1.75 in.<br/>Trip force<br/>68 kg<br/>150 lb<br/>Trip height<br/>25.4 cm<br/>10 in.<br/>Maximum operating depth<br/>12.7 cm<br/>5 in.<br/>Underframe clearance<br/>61 cm<br/>24 in.<br/>Spacing<br/>15.2 cm<br/>6 in.<br/>or 22.9 cm<br/>9 in.<br/>TruPosition
• Standard options - Option 3: Spec<br/>1.27x4.45 cm<br/>0.5x1.75 in.<br/><br/>Underframe clearance<br/>61 cm<br/>24 in.<br/>Spacing<br/>11.4 cm<br/>4.5 in.<br/>S-tine
• Standard spacing - Inches: Split-the-middle 15.2 cm<br/>6 in.<br/>*22.9 cm<br/>9 in.<br/>and S-tine *11.4 cm<br/>4.5 in.<br/>options (*spacing may not be exact in all locations)
• Transport height (without rear harrow) - 3-section: Option 1: 3.43 m (11.25 ft)<br/>Option 2: 3.66 m (12 ft)<br/>Option 3: 3.94 m (12.92 ft)<br/>Option 4: 4.22 m (13.83 ft)<br/>Option 5: 4.24 m (13.92 ft)<br/>Option 6: 4.52 m (14.83 ft)<br/>Option 7: 4.8 m (15.75 ft)<br/>Option 8: 4.11 m (13.5 ft)<br/>Option 9: 4.37 m (14.33 ft)
• Transport height (without rear harrow) - 5-section: Option 10: 3.83 m (12.58 ft)<br/>Option 11: 4.09 m (13.5 ft)<br/>Option 12: 4.37 m (14.33 ft)<br/>Option 13: 4.32 m (14.17 ft)<br/>Option 14: 4.62 m (15.17 ft)<br/>Option 15: 4.93 m (16.17 ft)
• Transport width (without rear harrow) - 3-section: Option 1: 4.19 m (13.75 ft)<br/>Option 2: 4.19 m (13.75 ft)<br/>Option 3: 4.19 m (13.75 ft)<br/>Option 4: 4.19 m (13.75 ft)<br/>Option 5: 4.78 m (15.67 ft)<br/>Option 6: 4.78 m (15.67 ft)<br/>Option 7: 4.8 m (15.75 ft)<br/>Option 8: 4.27 m (14 ft)<br/>Option 9: 5.45 m (18 ft)
• Transport width (without rear harrow) - 5-section: Option 10: 4.27 m (14 ft)<br/>Option 11: 4.27 m (14 ft)<br/>Option 12: 4.27 m (14 ft)<br/>Option 13: 4.9 m (16.08 ft)<br/>Option 14: 4.9 m (16.08 ft)<br/>Option 15: 4.9 m (16.08 ft)
• Wing frame wheels and tires - 3-section: Option 1: (4) 11L-15 FI LR D tires<br/>Option 2: (4) 11L-15 FI LR D tires<br/>Option 3: (4) 11L-15 FI LR D tires<br/>Option 4: (4) 11L-15 FI LR D tires<br/>Option 5: (4) 11L-15 FI LR D tires<br/>Option 6: (4) 11L-15 FI LR D tires<br/>Option 7: (4) 11L-15 FI LR D tires<br/>Option 8: (4) 12.5-L-15 FI LR D tires<br/>Option 9: (4) 12.5-L-15 FI LR D tires
• Wing frame wheels and tires - 5-section: Option 10: (4) 12.5-L-15 FI LR D tires<br/>Option 11: (4) 12.5-L-15 FI LR D tires<br/>Option 12: (4) 12.5-L-15 FI LR D tires<br/>Option 13: (4) 12.5-L-15 FI LR D tires<br/>Option 14: (4) 12.5-L-15 FI LR D tires<br/>Option 15: (4) 12.5-L-15 FI LR D tires
• Wing frame wheels and tires - Type: Wing frame tires on Walk-Over tandem wheels (radial tire option available)
• Working widths - 3-section: Option 1: 7.16 m (23.5 ft)<br/>Option 2: 7.77 m (25.5 ft)<br/>Option 3: 8.38 m (27.5 ft)<br/>Option 4: 8.99 m (29.5 ft)<br/>Option 5: 9.6 m (31.5 ft)<br/>Option 6: 10.2 m (33.5 ft)<br/>Option 7: 10.85 m (35.5 ft)<br/>Option 8: Low Transport - 11.73 m (38.5 ft)<br/>Option 9: Low Transport - 13.25 m (43.5 ft)
• Working widths - 5-section: Option 10: 12.95 m (42.5 ft)<br/>Option 11: 14.17 m (46.5 ft)<br/>Option 12: 15.4 m (50.5 ft)<br/>Option 13: 16 m (52.5 ft)<br/>Option 14: 17.22 m (56.5 ft)<br/>Option 15: 18.44 m (60.5 ft)

Copy Set