Soil Pulverizers
Soil Pulverizers
Soil Pulverizers
Soil Pulverizers
Soil Pulverizers
Soil Pulverizers

Models available: SP2060B, SP2072B

Soil Pulverizers

  • Compression springs for added force

  • Cutting teeth for superior soil preparation

  • iMatch™ compatibility

  • Steel roller studded with spikes


Features

  • The steel roller on all SP Series Soil Pulverizers are studded with 9.65-mm x 25.4-mm (0.38-in. x 1-in.) spikes that penetrate the toughest surfaces, breaking down clods and creating a fine finish. Add an optional second roller with two 36.3-kg (80-lb) compression springs for an even smoother finish.

  • By installing a second roller assembly kit to soil pulverizers, the second roller helps smooth out material after it has been pulverized. The field-conversion second roller assembly kits below are identified by part number and the specific soil pulverizers each kit is for.

  • The SP20 Series Soil Pulverizers feature a double set of 12.7-mm x 50.8-mm (0.5-in. x 2-in.) bar-type cutting teeth. Their staggered mounting slices the surface every 71.1 mm (2.8 in.) for superior soil preparation. The teeth are reversible for extra life.

  • The SP10 Series Soil Pulverizers have two 68-kg (150-lb) compression springs, and the SP20 Series Soil Pulverizers have two 72.6-kg (160-lb) compression springs to keep the roller in contact with the ground and force the spikes into the soil down to 25.4-mm (1-in.) deep.

  • The iMatch quick-hitch system converts the tractor's 3-point hitch to fixed hooks for a super-quick connection.

  • Features

    Features

    • The steel roller on all SP Series Soil Pulverizers are studded with 9.65-mm x 25.4-mm (0.38-in. x 1-in.) spikes that penetrate the toughest surfaces, breaking down clods and creating a fine finish. Add an optional second roller with two 36.3-kg (80-lb) compression springs for an even smoother finish.

    • By installing a second roller assembly kit to soil pulverizers, the second roller helps smooth out material after it has been pulverized. The field-conversion second roller assembly kits below are identified by part number and the specific soil pulverizers each kit is for.

    • The SP20 Series Soil Pulverizers feature a double set of 12.7-mm x 50.8-mm (0.5-in. x 2-in.) bar-type cutting teeth. Their staggered mounting slices the surface every 71.1 mm (2.8 in.) for superior soil preparation. The teeth are reversible for extra life.

    • The SP10 Series Soil Pulverizers have two 68-kg (150-lb) compression springs, and the SP20 Series Soil Pulverizers have two 72.6-kg (160-lb) compression springs to keep the roller in contact with the ground and force the spikes into the soil down to 25.4-mm (1-in.) deep.

    • The iMatch quick-hitch system converts the tractor's 3-point hitch to fixed hooks for a super-quick connection.

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location