New John Deere XUV560E | Sloan Implement
XUV560E Crossover Utility Vehicle
  • 4.9% for 84 Months!*

  • Four-wheel independent suspension for excellent ride and handling

  • Ergonomic operator station with easy-to-use controls

  • Versatile customization

*Offer valid on qualifying purchases made 01 August 2024 through 25 October 2024. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. Down payment may be required. 4.9% APR is for 84 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.50% APR (as of 01 September 2023). Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

Features

  • Top Speed: 28 mph

  • Engine: V-Twin, Air Cooled

  • Cargo Capacity: 500 lb

  • Payload Capacity: 900 lb

  • HP: 16 hp*

Specifications

Additional information - Country of Manufacture:
U.S.
Brakes - Park brake:
Park in-transmission
Brakes - Type:
196 mm ventilated four-wheel stainless steel disc brakes with hydraulic 34.93 mm (1.375 in.) diameter twin-piston calipers
Dimensions / Capacities - Cargo box capacity (weight):
227 kg
500 lb
Dimensions / Capacities - Cargo box dimensions:
82 x 120.9 x 29.7 cm
32.3 x 47.6 x 11.7 in.
0.25 m3
8.9 cu ft
Dimensions / Capacities - Fuel capacity:
18.5 L
4.9 U.S. gal.
Dimensions / Capacities - Ground clearance:
Minimum: 267 mm
10.5 in.
Dimensions / Capacities - Height:
1867 mm
73.5 in.
Dimensions / Capacities - Hitch:
Standard 50 mm (2 in.) rear receiver with optional 50 mm (2 in.) front receiver with recovery loops
Dimensions / Capacities - Length:
2870 mm
113 in.
Dimensions / Capacities - Operating weight (includes fuel/fluids):
571 kg
1259 lb
Dimensions / Capacities - Payload capacity:
408 kg
900 lb
Dimensions / Capacities - Towing capacity:
680 kg
1500 lb
Dimensions / Capacities - Tread centers:
Front: 1220 mm
48 in.
Rear: 1168 mm
46 in.
Dimensions / Capacities - Wheelbase:
1.86 m
72.8 in.
Dimensions / Capacities - Width:
1435 mm
56.5 in.
Drivetrain - Descent control:
Not available
Drivetrain - Final drive:
Park, high, low, neutral, reverse transaxle
Drivetrain - Four wheel drive:
Dash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
Drivetrain - Traction assist:
Positive locking, switch actuated rear differential lock
Drivetrain - Transmission:
Continuously Variable Transmission (CVT) with clutch enclosure
Engine - Cooling system:
Air cooled
Engine - Displacement:
570 cc
Engine - Power:
11.9* kW
16 hp
Engine - Type:
4-cycle gas, V-twin, dynamically tuned carb, overhead valves (OHV)
Features - Battery / Alternator / Power port:
340 CCA
16 amp @ 4100 rpm, regulated
12 VDC standard outlet
Features - Color:
Green/yellow, olive/black, camo
Features - Instrumentation:
Digital display with hour meter with maintenance and driver seatbelt reminder; speedometer, gear position, 4WD indicator, rear differential indicator, and engine oil temperature sensor
Features - Power steering:
Not available
Features - Seating:
Bench seat
Features - Storage:
Two cupholders, sealed underhood storage, glovebox
Key Specs - Cargo box capacity (weight):
227 kg
500 lb
Key Specs - Cargo box dimensions:
82 x 120.9 x 29.7 cm
32.3 x 47.6 x 11.7 in.
0.25 m3
8.9 cu ft
Key Specs - Engine power:
11.9* kW
16 hp
Key Specs - Final drive:
Park, high, low, neutral, reverse transaxle
Key Specs - Four wheel drive:
Dash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
Key Specs - Front suspension:
Fully independent dual A-arm with adjustable coil over shocks, 203 mm (8 in.) travel, anti-roll bar
Key Specs - Fuel capacity:
18.5 L
4.9 U.S. gal.
Key Specs - Rear suspension:
Fully independent with lower A-arm and upper camber link with adjustable coil over shocks, 203 mm (8 in.) travel
Key Specs - Towing capacity:
680 kg
1500 lb
Suspension - Front:
Fully independent dual A-arm with adjustable coil over shocks, 203 mm (8 in.) travel, anti-roll bar
Suspension - Rear:
Fully independent with lower A-arm and upper camber link with adjustable coil over shocks, 203 mm (8 in.) travel
Tires / Wheels - Front:
25x8-12 Terrahawk AT (All Terrain) 4-ply rating yellow steel wheels
Optional: 26x8-14 Maxxis® Bighorn® 2.0 6-ply rating aluminum alloy wheels, yellow or 26x8-14 Maxxis Bighorn 2.0 6-ply rating yellow steel wheels
Tires / Wheels - Rear:
25x10-12 Terrahawk AT (All Terrain) 4-ply rating yellow steel wheels
Optional: 26x10-14 Maxxis Bighorn 2.0 6-ply rating yellow aluminum alloy wheels or 26x10-14 Maxxis Bighorn 2.0 6-ply rating on yellow steel wheels

Four-wheel independent suspension provides unparalleled ride over challenging terrain and excellent handling through corners

XUV front suspension detail XUV front suspension detail

To complement the comfortable operation station, the XUV560 and XUV590 Series are equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

 

The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

Dual A-arm front suspension features include:
  • Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
  • Automotive-style, fully boxed and welded, high-strength steel, lower A-arms to minimize unsprung mass and maximize strength
  • Maintenance-free, rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
  • Anti-dive front suspension geometry provides a solid platform for confident braking
  • Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback
XUV rear suspension detail XUV rear suspension detail
Independent rear suspension features include:
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
  • Adjustable coil-over shocks absorb the most demanding terrain
  • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
  • Increasing vehicle width during compression for additional stability.
  • High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
Optional Fox™ Shocks are available to factory install

Exclusive aluminum-body, high-pressure monotube FOX racing shocks

  • Fully adjustable spring preload for different driving styles
  • High-pressure nitrogen gas is separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
  • Pressure and heat generation in the monotube is less than a traditional twin-tube shock, allowing for better vehicle control in aggressive conditions.
  • The single aluminum shell of the monotube design allows for more efficient heat rejection and lower overall unsprung mass.
  • Mounting the shaft end of the shock to the suspension arm lowers the unsprung mass of the suspension system, leading to improved suspension response.

NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.

Delivers quick acceleration and provides a top speed of 45 km/h (28 mph)

Powertrain 570-cm<sup>3</sup> (34.8-cu in.) gasoline engine Powertrain 570-cm3 (34.8-cu in.) gasoline engine

The Gator™ XUV560E Crossover Series Utility Vehicles are powered by a 570-cm3 (34.8-cu in.), V-twin gasoline engine. The carburetor is tuned for rapid throttle response, reliable cold-weather starting, smooth mid-range power delivery and quiet idling.

The engine offers the following performance and reliability features:

  • 11.9 kW (16 hp*) at 3600 rpm
  • Tuned to deliver 0 to 24.1 km/h (0 to 15 mph) acceleration in 3.5 seconds
  • 45 km/h (28 mph) top speed
  • Dynamically tuned carburetor for rapid throttle response upon demand while allowing the engine to burn clean under light loads.
  • V-twin, 90-degree overhead valve design maximizes power and torque and provides longer valve life
  • Designed for cold-weather starting (tested to [-28.9°C [-20°F])
  • Full-pressure lubrication system
  • Spin-on oil filter with drain bracket and oil drain valve enable easy servicing
  • High air-flow air filter
  • Laminated and contoured engine blower housing cuts noise levels while reducing oil temperatures 25-30 degrees
  • T6 heat-treated aluminum alloy connecting rods and piston ring package
  • 200-W (16 maximum amp) stator charging system for accessory capability
  • Dual-header pipe to muffler maximizes airflow and provides a unique V-twin sound
  • Spark-arresting muffler is United States Forest Service (USFS) approved
  • Low fuel consumption and large 18.9-L (4.9-U.S. gal.) fuel tank
  • Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

 

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

Designed for all-day comfort with many vehicle conveniences

Digital instrument display (fuel not on 560E models) Digital instrument display (fuel not on 560E models)
Sealed under-hood storage Sealed under-hood storage
In-dash cup holders and sealed glove box In-dash cup holders and sealed glove box
S4 optional under-seat storage S4 optional under-seat storage
  • Digital display features:
    • Speed
    • Mechanical front-wheel drive (MFWD)/rear diff-lock
    • Gear position
    • Hour/trip meter
  • Operator-centric design provides class-leading ergonomics and comfortable seats
    • Easy entry/exit and pass through for operator and passenger
    • Optimal seating position provides more legroom
    • Automotive-like ergonomics
    • Excellent comfort while driving
  • Best-in-class sealed storage volume of 12.7 gal. (48 L) with a large in-dash glove box and under hood storage. An additional 9 gal. (34 L) of under-seat storage is available on the S4 models.
  • Hinged hood rotates open without tools for access to storage
  • Side-by-side seating provides ample room for one operator and one passenger
    • Seats tilt forward for ease of service and to keep dry during outdoor storage
  • Two cup holders are located within reach of the operator's station
  • Hour-meter comes standard to assist in maintaining regular service intervals
  • Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
  • Seven predrilled dash switch locations with snap out caps for various electrical accessories
  • Fuel gauge that can be viewed from the operator's seat
  • Occupant protective structure (OPS) with three-point seat belts and passenger side grab handles located on front post
  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.

Precision-engineered drive system optimizes acceleration, hauling, towing, and hill-climbing capabilities

The Gator™ XUV Mid-Size Crossover Series Utility Vehicles have a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive (shown on XUV590 engine) Variable-speed drive (shown on XUV590 engine)

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • Ability to creep along slowly to maneuver in tight spaces
  • Standard full-clutch enclosure with a high intake and exhaust ensures a dry belt when crossing water
    • High-speed fan on drive clutch provides longer belt and clutch life by keeping components cool
  • TEAM® industry clutches provide high performance and longevity 

How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Four-wheel drive (4WD), transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
XUV590 transaxle XUV590 transaxle
XUV560/XUV590 MFWD XUV560/XUV590 MFWD

4WD

  • Selectable 4WD system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
    • More control descending hills with 4WD engaged, as all four wheels help slow the vehicle down
      • Clutch engagement still necessary to prevent free coasting

Transaxle

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • Cast-aluminum design for lower weight
  • Helical forward and reverse gears are used for quiet operation
  • Rear traction assist (differential lock) is controlled with an electronic rocker switch
    • NOTE: Locked differential design may increase scuffing of the turf during turns because the rear wheels are turning at the same speed through a turn.
  • Contains gear-case for transferring power to the MFWD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Vertically oriented oil drain for easy maintenance
  • Protected by a skid plate

MFWD

  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
  • Near instantaneous torque to the front wheels after engaging switch
  • Vertically oriented oil drain for easy maintenance
  • Protected by a steel skid plate and frame

Drive shafts

  • Front and rear CV shaft diameter measures 23 mm (0.9 in.) and designed for high engine torque
  • Propshaft (transaxle to MFWD shaft) diameter measures 23.8 mm (0.94 in.) and designed for high engine torque
  • All CV shaft joints are maintenance free and protected by exclusive inboard and outboard thermoplastic elastomer (TPE) boots for durability. TPE material is more puncture resistant than neoprene, which is used by many competitors.

TEAM is a trademark of TEAM Industries.

Sleek styling exemplifies capable off-road, yet hard-working performance

XUV shown in green and yellow XUV shown in green and yellow

A modern front fascia, wide front bumper, sweeping hood lines, and high fender lines complete the styling package:

  • Sleek styling exemplifies a capable off-road, yet hard-working vehicle. The Gator™ XUV Series suits the emotional appeal of an operator purchasing a vehicle that is fun and functional.
    • Hard-edged lines
    • Hood bulge
    • Sweeping headlights with mounting locations for a turn signal light kit
    • High front and rear fenders states long wheel travel
    • Well-matched cargo box with truck-style tailgate
  • Steel front bumper supports the styled front composite parts, while the heavy steel skid plate provides protection from rocks and stumps
  • Styled parts are injection-molded TPO, a durable, engineered plastic designed to sustain impacts; the plastic is paintable
  • Accepts the highly integrated optional 50.8-mm (2-in.) front receiver hitch with recovery loops and WARN® 1587.6-kg (3500-lb) winch
  • 75-plus attachments, such as roofs, windshields, lights, protection components, and poly cab highly complement the overall look of a capable crossover vehicle.

 

WARN is a trademark of Warn Industries, Inc.

Large, extra-durable, one-piece cargo box ensures hard-driving performance and longevity

The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly styled exterior pieces are made of TPO for extra durability.

Cargo box tailgate
Tailgate handle Tailgate handle
Tailgate pivot and removal feature Tailgate pivot and removal feature
Removable lanyards Removable lanyards

The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

Cargo box tilt and removal
Integrated handle for manual cargo box tilt (both sides) Integrated handle for manual cargo box tilt (both sides)
Tilted cargo box Tilted cargo box

The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release also functions as the lift lever, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy-to-use attributes makes this cargo box best-in-class.

For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

Integrated tie-down points
Integrated tie-down point in cargo box bed Integrated tie-down point in cargo box bed
Additional tie-down points Additional tie-down points

The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Flip-up D-shaped rings in all four corners inside the cargo box bed
  • Multiple points along the edge of the cargo box side walls
  • Tie-down bars on either side of the cargo box with optional cargo box rail kit. This kit also provides a mounting system using accessories that possess the 25.4-mm (1-in.) quick clamp.
Optional accessories
Cargo box rail system Cargo box rail system
Box mat Box mat
Cargo box wall extensions (shown on RSX) Cargo box wall extensions (shown on RSX)

Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

  • Cargo box rail system
  • Cargo box mat
  • Cargo box wall extensions
  • Spare tire rack
  • Bucket holder
Specifications
Length  82 cm (32.3 in.)
Width 120.9 cm (47.6 in.)
Depth 29.7 cm (11.7 in.)
Volume 0.25 m3 (8.9 cu ft)
Weight capacity 227 kg (500 lb)
Dump angle
Bed height (from ground)
 

45 degrees

76.3 cm (30 in.)

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

  • Features

    Features

    • Top Speed: 28 mph

    • Engine: V-Twin, Air Cooled

    • Cargo Capacity: 500 lb

    • Payload Capacity: 900 lb

    • HP: 16 hp*

  • Specifications

    Specifications

    Additional information - Country of Manufacture:
    U.S.
    Brakes - Park brake:
    Park in-transmission
    Brakes - Type:
    196 mm ventilated four-wheel stainless steel disc brakes with hydraulic 34.93 mm (1.375 in.) diameter twin-piston calipers
    Dimensions / Capacities - Cargo box capacity (weight):
    227 kg
    500 lb
    Dimensions / Capacities - Cargo box dimensions:
    82 x 120.9 x 29.7 cm
    32.3 x 47.6 x 11.7 in.
    0.25 m3
    8.9 cu ft
    Dimensions / Capacities - Fuel capacity:
    18.5 L
    4.9 U.S. gal.
    Dimensions / Capacities - Ground clearance:
    Minimum: 267 mm
    10.5 in.
    Dimensions / Capacities - Height:
    1867 mm
    73.5 in.
    Dimensions / Capacities - Hitch:
    Standard 50 mm (2 in.) rear receiver with optional 50 mm (2 in.) front receiver with recovery loops
    Dimensions / Capacities - Length:
    2870 mm
    113 in.
    Dimensions / Capacities - Operating weight (includes fuel/fluids):
    571 kg
    1259 lb
    Dimensions / Capacities - Payload capacity:
    408 kg
    900 lb
    Dimensions / Capacities - Towing capacity:
    680 kg
    1500 lb
    Dimensions / Capacities - Tread centers:
    Front: 1220 mm
    48 in.
    Rear: 1168 mm
    46 in.
    Dimensions / Capacities - Wheelbase:
    1.86 m
    72.8 in.
    Dimensions / Capacities - Width:
    1435 mm
    56.5 in.
    Drivetrain - Descent control:
    Not available
    Drivetrain - Final drive:
    Park, high, low, neutral, reverse transaxle
    Drivetrain - Four wheel drive:
    Dash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
    Drivetrain - Traction assist:
    Positive locking, switch actuated rear differential lock
    Drivetrain - Transmission:
    Continuously Variable Transmission (CVT) with clutch enclosure
    Engine - Cooling system:
    Air cooled
    Engine - Displacement:
    570 cc
    Engine - Power:
    11.9* kW
    16 hp
    Engine - Type:
    4-cycle gas, V-twin, dynamically tuned carb, overhead valves (OHV)
    Features - Battery / Alternator / Power port:
    340 CCA
    16 amp @ 4100 rpm, regulated
    12 VDC standard outlet
    Features - Color:
    Green/yellow, olive/black, camo
    Features - Instrumentation:
    Digital display with hour meter with maintenance and driver seatbelt reminder; speedometer, gear position, 4WD indicator, rear differential indicator, and engine oil temperature sensor
    Features - Power steering:
    Not available
    Features - Seating:
    Bench seat
    Features - Storage:
    Two cupholders, sealed underhood storage, glovebox
    Key Specs - Cargo box capacity (weight):
    227 kg
    500 lb
    Key Specs - Cargo box dimensions:
    82 x 120.9 x 29.7 cm
    32.3 x 47.6 x 11.7 in.
    0.25 m3
    8.9 cu ft
    Key Specs - Engine power:
    11.9* kW
    16 hp
    Key Specs - Final drive:
    Park, high, low, neutral, reverse transaxle
    Key Specs - Four wheel drive:
    Dash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
    Key Specs - Front suspension:
    Fully independent dual A-arm with adjustable coil over shocks, 203 mm (8 in.) travel, anti-roll bar
    Key Specs - Fuel capacity:
    18.5 L
    4.9 U.S. gal.
    Key Specs - Rear suspension:
    Fully independent with lower A-arm and upper camber link with adjustable coil over shocks, 203 mm (8 in.) travel
    Key Specs - Towing capacity:
    680 kg
    1500 lb
    Suspension - Front:
    Fully independent dual A-arm with adjustable coil over shocks, 203 mm (8 in.) travel, anti-roll bar
    Suspension - Rear:
    Fully independent with lower A-arm and upper camber link with adjustable coil over shocks, 203 mm (8 in.) travel
    Tires / Wheels - Front:
    25x8-12 Terrahawk AT (All Terrain) 4-ply rating yellow steel wheels
    Optional: 26x8-14 Maxxis® Bighorn® 2.0 6-ply rating aluminum alloy wheels, yellow or 26x8-14 Maxxis Bighorn 2.0 6-ply rating yellow steel wheels
    Tires / Wheels - Rear:
    25x10-12 Terrahawk AT (All Terrain) 4-ply rating yellow steel wheels
    Optional: 26x10-14 Maxxis Bighorn 2.0 6-ply rating yellow aluminum alloy wheels or 26x10-14 Maxxis Bighorn 2.0 6-ply rating on yellow steel wheels
  • Details

    Four-wheel independent suspension provides unparalleled ride over challenging terrain and excellent handling through corners

    XUV front suspension detail XUV front suspension detail

    To complement the comfortable operation station, the XUV560 and XUV590 Series are equipped with four-wheel independent suspension. This unique suspension set-up provides an unparalleled ride over challenging terrain and excellent handling through corners.

     

    The engineering team, in collaboration with engineering firms that consult with Formula 1®, NASCAR®, and INDYCAR® teams, built a capable suspension system for class-leading operator comfort no matter what the terrain.

    Dual A-arm front suspension features include:
    • Dual, wide arch A-arm design provides maximum front-wheel control, precise steering, and maximum ground clearance out to the wheel
    • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
    • Adjustable coil-over shocks absorb the most demanding terrain
    • Solid anti-roll bar with fully rubber isolated connecting links and pivots is tuned to provide the most agile and predictable handling
    • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
    • Increasing vehicle width during compression for additional stability.
    • High-strength ASTM 80-55-06 ductile cast-iron knuckle and upper A-arm to support the high stresses of the shocks, constant-velocity (CV) shaft, and wheels
    • Automotive-style, fully boxed and welded, high-strength steel, lower A-arms to minimize unsprung mass and maximize strength
    • Maintenance-free, rubber torsional A-arm pivots for long life and quiet operation
    • CV shaft protection from sticks that may puncture the rubber boot
    • Anti-dive front suspension geometry provides a solid platform for confident braking
    • Optimized steering geometry using ADAMS CAR simulation to minimize steering effort and maximize terrain feedback
    XUV rear suspension detail XUV rear suspension detail
    Independent rear suspension features include:
    • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
    • Unique, independent rear-suspension design ensures a great ride and protection for the CV shafts
    • Adjustable coil-over shocks absorb the most demanding terrain
    • Camber during compression to compensate for body roll and to maintain an optimal tire contact patch for improved cornering grip
    • Increasing vehicle width during compression for additional stability.
    • High-strength ASTM 80-55-06 ductile cast-iron knuckle, lower A-arm, and upper link to support the high stresses of the shocks, CV shaft, and wheels with the toughness to survive impacts from boulders
    • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
    Optional Fox™ Shocks are available to factory install

    Exclusive aluminum-body, high-pressure monotube FOX racing shocks

    • Fully adjustable spring preload for different driving styles
    • High-pressure nitrogen gas is separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
    • Pressure and heat generation in the monotube is less than a traditional twin-tube shock, allowing for better vehicle control in aggressive conditions.
    • The single aluminum shell of the monotube design allows for more efficient heat rejection and lower overall unsprung mass.
    • Mounting the shaft end of the shock to the suspension arm lowers the unsprung mass of the suspension system, leading to improved suspension response.

    NASCAR is a trademark of NASCAR. INDYCAR is a trademark of Brickyard Trademarks Incorporated. Formula 1 is a trademark of Formula One Licensing BV, a Formula One Group Company.

    Delivers quick acceleration and provides a top speed of 45 km/h (28 mph)

    Powertrain 570-cm<sup>3</sup> (34.8-cu in.) gasoline engine Powertrain 570-cm3 (34.8-cu in.) gasoline engine

    The Gator™ XUV560E Crossover Series Utility Vehicles are powered by a 570-cm3 (34.8-cu in.), V-twin gasoline engine. The carburetor is tuned for rapid throttle response, reliable cold-weather starting, smooth mid-range power delivery and quiet idling.

    The engine offers the following performance and reliability features:

    • 11.9 kW (16 hp*) at 3600 rpm
    • Tuned to deliver 0 to 24.1 km/h (0 to 15 mph) acceleration in 3.5 seconds
    • 45 km/h (28 mph) top speed
    • Dynamically tuned carburetor for rapid throttle response upon demand while allowing the engine to burn clean under light loads.
    • V-twin, 90-degree overhead valve design maximizes power and torque and provides longer valve life
    • Designed for cold-weather starting (tested to [-28.9°C [-20°F])
    • Full-pressure lubrication system
    • Spin-on oil filter with drain bracket and oil drain valve enable easy servicing
    • High air-flow air filter
    • Laminated and contoured engine blower housing cuts noise levels while reducing oil temperatures 25-30 degrees
    • T6 heat-treated aluminum alloy connecting rods and piston ring package
    • 200-W (16 maximum amp) stator charging system for accessory capability
    • Dual-header pipe to muffler maximizes airflow and provides a unique V-twin sound
    • Spark-arresting muffler is United States Forest Service (USFS) approved
    • Low fuel consumption and large 18.9-L (4.9-U.S. gal.) fuel tank
    • Environmental Protection Agency (EPA) and California Air Resources Board (CARB) compliant

     

    * The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

    Designed for all-day comfort with many vehicle conveniences

    Digital instrument display (fuel not on 560E models) Digital instrument display (fuel not on 560E models)
    Sealed under-hood storage Sealed under-hood storage
    In-dash cup holders and sealed glove box In-dash cup holders and sealed glove box
    S4 optional under-seat storage S4 optional under-seat storage
    • Digital display features:
      • Speed
      • Mechanical front-wheel drive (MFWD)/rear diff-lock
      • Gear position
      • Hour/trip meter
    • Operator-centric design provides class-leading ergonomics and comfortable seats
      • Easy entry/exit and pass through for operator and passenger
      • Optimal seating position provides more legroom
      • Automotive-like ergonomics
      • Excellent comfort while driving
    • Best-in-class sealed storage volume of 12.7 gal. (48 L) with a large in-dash glove box and under hood storage. An additional 9 gal. (34 L) of under-seat storage is available on the S4 models.
    • Hinged hood rotates open without tools for access to storage
    • Side-by-side seating provides ample room for one operator and one passenger
      • Seats tilt forward for ease of service and to keep dry during outdoor storage
    • Two cup holders are located within reach of the operator's station
    • Hour-meter comes standard to assist in maintaining regular service intervals
    • Standard 12-V direct current (VDC) outlet is conveniently located on the instrument panel
    • Seven predrilled dash switch locations with snap out caps for various electrical accessories
    • Fuel gauge that can be viewed from the operator's seat
    • Occupant protective structure (OPS) with three-point seat belts and passenger side grab handles located on front post
    • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.

    Precision-engineered drive system optimizes acceleration, hauling, towing, and hill-climbing capabilities

    The Gator™ XUV Mid-Size Crossover Series Utility Vehicles have a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

    Key elements of the drive system include:

    Variable-speed drive
    Variable-speed drive (shown on XUV590 engine) Variable-speed drive (shown on XUV590 engine)

    The variable-speed drive consists of two clutches and a drive belt:

    • Drive clutch is attached to the engine.
    • Driven clutch is attached to the transaxle.

    Features include:

    • Ability to creep along slowly to maneuver in tight spaces
    • Standard full-clutch enclosure with a high intake and exhaust ensures a dry belt when crossing water
      • High-speed fan on drive clutch provides longer belt and clutch life by keeping components cool
    • TEAM® industry clutches provide high performance and longevity 

    How the variable-speed drive works:

    1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
    2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
    3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
    4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
    Four-wheel drive (4WD), transaxle, mechanical front-wheel drive (MFWD), and constant-velocity (CV) shafts
    XUV590 transaxle XUV590 transaxle
    XUV560/XUV590 MFWD XUV560/XUV590 MFWD

    4WD

    • Selectable 4WD system with a limited slip front differential and dash-mounted electronic rocker switch
      • Provides exceptional traction in challenging conditions
      • Maintains turf-friendly operation in two-wheel drive (2WD) mode
      • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
      • More control descending hills with 4WD engaged, as all four wheels help slow the vehicle down
        • Clutch engagement still necessary to prevent free coasting

    Transaxle

    • Low, high, neutral, reverse, and park transaxle
    • Automotive-style, integrated park position in transmission
    • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.
    • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
    • High range for maximum vehicle speed
    • Cast-aluminum design for lower weight
    • Helical forward and reverse gears are used for quiet operation
    • Rear traction assist (differential lock) is controlled with an electronic rocker switch
      • NOTE: Locked differential design may increase scuffing of the turf during turns because the rear wheels are turning at the same speed through a turn.
    • Contains gear-case for transferring power to the MFWD
    • Splined shaft interfaces for maximum torque transfer and durability
    • All drive gears machined from highest grade gear steel
    • Vertically oriented oil drain for easy maintenance
    • Protected by a skid plate

    MFWD

    • Electronically selectable by the operator
      • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
    • Near instantaneous torque to the front wheels after engaging switch
    • Vertically oriented oil drain for easy maintenance
    • Protected by a steel skid plate and frame

    Drive shafts

    • Front and rear CV shaft diameter measures 23 mm (0.9 in.) and designed for high engine torque
    • Propshaft (transaxle to MFWD shaft) diameter measures 23.8 mm (0.94 in.) and designed for high engine torque
    • All CV shaft joints are maintenance free and protected by exclusive inboard and outboard thermoplastic elastomer (TPE) boots for durability. TPE material is more puncture resistant than neoprene, which is used by many competitors.

    TEAM is a trademark of TEAM Industries.

    Sleek styling exemplifies capable off-road, yet hard-working performance

    XUV shown in green and yellow XUV shown in green and yellow

    A modern front fascia, wide front bumper, sweeping hood lines, and high fender lines complete the styling package:

    • Sleek styling exemplifies a capable off-road, yet hard-working vehicle. The Gator™ XUV Series suits the emotional appeal of an operator purchasing a vehicle that is fun and functional.
      • Hard-edged lines
      • Hood bulge
      • Sweeping headlights with mounting locations for a turn signal light kit
      • High front and rear fenders states long wheel travel
      • Well-matched cargo box with truck-style tailgate
    • Steel front bumper supports the styled front composite parts, while the heavy steel skid plate provides protection from rocks and stumps
    • Styled parts are injection-molded TPO, a durable, engineered plastic designed to sustain impacts; the plastic is paintable
    • Accepts the highly integrated optional 50.8-mm (2-in.) front receiver hitch with recovery loops and WARN® 1587.6-kg (3500-lb) winch
    • 75-plus attachments, such as roofs, windshields, lights, protection components, and poly cab highly complement the overall look of a capable crossover vehicle.

     

    WARN is a trademark of Warn Industries, Inc.

    Large, extra-durable, one-piece cargo box ensures hard-driving performance and longevity

    The cargo box consists of a high-density polyethylene copolymer composite material that eliminates rust, dents, and reduces noise. This large, one-piece design has rounded inside corners to ensure material removal when tilted. The composite box is highly ribbed and supported with a welded, steel-ladder structure to ensure hard-driving performance and longevity. The three highly styled exterior pieces are made of TPO for extra durability.

    Cargo box tailgate
    Tailgate handle Tailgate handle
    Tailgate pivot and removal feature Tailgate pivot and removal feature
    Removable lanyards Removable lanyards

    The tailgate can be opened or removed for easier cleanout and to carry longer items. It features truck-like performance and can be operated with one hand.

    The tailgate’s pivot point is made of hardened steel for durability and designed for tool-free removal. The standard lanyards can also be disconnected without tools to remove the tailgate for convenient loading and unloading tasks.

    Cargo box tilt and removal
    Integrated handle for manual cargo box tilt (both sides) Integrated handle for manual cargo box tilt (both sides)
    Tilted cargo box Tilted cargo box

    The cargo box ease of use is critical to performing tasks quickly and efficiently. Starting with the truck-style tailgate, the removal of content in this cargo box could not be easier. The manual release also functions as the lift lever, done in a smooth, one-step motion. It can even be tilted from both sides of the vehicle. To reduce the overall effort of lift, the pivot point of the cargo box is closer to the center. The combination of easy-to-use attributes makes this cargo box best-in-class.

    For servicing the vehicle’s systems, the cargo box is easily removable. With the removal of two bolts, the cargo box can easily be detached from the vehicle frame.

    Integrated tie-down points
    Integrated tie-down point in cargo box bed Integrated tie-down point in cargo box bed
    Additional tie-down points Additional tie-down points

    The cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

    • Flip-up D-shaped rings in all four corners inside the cargo box bed
    • Multiple points along the edge of the cargo box side walls
    • Tie-down bars on either side of the cargo box with optional cargo box rail kit. This kit also provides a mounting system using accessories that possess the 25.4-mm (1-in.) quick clamp.
    Optional accessories
    Cargo box rail system Cargo box rail system
    Box mat Box mat
    Cargo box wall extensions (shown on RSX) Cargo box wall extensions (shown on RSX)

    Optional accessories for the cargo box include (see price pages or JDConfigurator for complete list):

    • Cargo box rail system
    • Cargo box mat
    • Cargo box wall extensions
    • Spare tire rack
    • Bucket holder
    Specifications
    Length  82 cm (32.3 in.)
    Width 120.9 cm (47.6 in.)
    Depth 29.7 cm (11.7 in.)
    Volume 0.25 m3 (8.9 cu ft)
    Weight capacity 227 kg (500 lb)
    Dump angle
    Bed height (from ground)
     

    45 degrees

    76.3 cm (30 in.)

    CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Sloan Implement Employee Portal