FC20M Flex Wing Rotary Cutter
  • 20 ft. cutting width
  • 540 or 1000 PTO RPM
  • Front and rear suspension options
  • Laminated, pneumatic, or foam filled 4-bolt tires

Features

  • PTO HP: 75 hp (56 kW)

  • Working Width: 20 ft. (6.1 m)

  • Hitch Type: Standard clevis / ball type optional (self-level)

Specifications

Blades - Blade holder:
Type
Round stump jumper for maximum protection for blade carrier against obstruction damage
Blades - Blade tip speed:
540 RPM
86.6 m/s
284.1 fps
Blades - Overlap:
152 mm
6 in.
Blades - Thickness:
13 mm
0.5 in.
Blades - Type:
Suction
Blades - Width:
102 mm
4 in.
Capacity - Cutting capacity (diameter):
50.8 mm
2 in.
Capacity - Cutting chamber depth:
254 mm
10 in.
Capacity - Cutting height:
25.4-406.4 mm
1-16 in.
Capacity - Cutting width:
3.7 m
12 ft
Dimensions - Approx. weight:
1623 kg
3580 lb
Dimensions - Deck shape:
Easy-clean dome-shaped top deck
Dimensions - Deck thickness:
11 gauge - 3 mm
0.12 in.
Dimensions - Deck type:
Single dome deck
Dimensions - Hinges:
Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
Dimensions - Overall length:
4.8 m
15.7 ft
Dimensions - Overall width:
3.8 m
12.4 ft
Dimensions - Shirt thickness:
3 gauge - 6 mm
0.24 in.
Dimensions - Transport width:
7.5 ft (2.3 m) at wing wheels
Drivelines - Protection:
Connecting
No-seize, slip-clutch driveline
Drivelines - Size:
Main
CV ASAE Category 4, splined telescoping profiles
Connecting
ASAE Category 4, splined telescoping profiles
Gearcases - HP rating:
Transfer
Continuous: 186 kW
250 hp
Peak: 224 kW
300 hp
Center
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Outer
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Gearcases - Number:
4
Hitch - Jackstand:
Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
Hitch - Type:
Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
Hydraulics - Wing flex:
For transport: upward 90 degree (angle)
Working angles: upward 45 degree (angle)
downward 22 degree (angle)
Hydraulics - Wing lift:
Simultaneous
Key Specs - Approx. weight:
1623 kg
3580 lb
Key Specs - Blade tip speed - 540 rpm - 1000 rpm:
86.6 m/s
284.1 fps
Key Specs - Cutting capacity (diameter):
50.8 mm
2 in.
Key Specs - Cutting width:
3.7 m
12 ft
Key Specs - Deck thickness - upper - lower:
11 gauge - 3 mm
0.12 in.
Key Specs - Drivelines - Size - Main:
CV ASAE Category 4, splined telescoping profiles
Key Specs - Gearboxes:
Five years
Key Specs - Shirt thickness:
3 gauge - 6 mm
0.24 in.
Key Specs - Tractor PTO HP range:
30 kW
40 hp
Key Specs - Transport width:
7.5 ft (2.3 m) at wing wheels
Shielding - Front:
Single-row chain guard
Shielding - Rear:
Single-row chain guard
Tractor compatibility - Tractor PTO:
540 rpm
Tractor compatibility - Tractor PTO HP range:
30 kW
40 hp
Warranty - Gearboxes:
Five years
Wheels - Row width adjustment:
No
Wheels - Suspension:
No suspension - rigid back axle
Wheels - Type:
Option 1
4-bolt, laminated: 21x5.25x9
Option 2
4-bolt, 16PR severe-duty ag: 21x7x12
Wheels - Wing-leveling adjustment:
Easy adjust turnbuckle with bearing

Safety

John Deere flex-wing rotary cutters are equipped with chains and lights as standard in all models.

Front and rear safety chains
Front safety chains Front safety chains

Chain shields offer protection to the operator and the area surrounding the cutter yet allow uncut material to pass into the cutting chamber with minimal restriction.

Optional double-row chains for R-spec models Optional double-row chains for R-spec models

An extra row of chain shields for the front, back or both sides can be added for increased protection against debris coming from the cutting chamber.

Lighting kit
Lighting kit Lighting kit

Lights are required for U.S. regulations on implements wider than 3.05 m (10 ft). All cutters come standard from the factory with lights.

Transport lock
Transport lock on back axle Transport lock on back axle
Transport lock on wings Transport lock on wings

The center axle can be locked easily for transport or service by flipping the lock over the cylinder rod. Wing locks use a pin that can be conveniently stored when not in use. Additionally, on M and R Series, the wing locks are spring-loaded so they can unfold against gravity on slopes up to 5 degrees. Always use the transport lock on the wings and center axle while transporting or moving the machine.

 

 

 

What is the best cutter for your job?

NOTE: Only for E, M, and R flex-wing models.

 

John Deere flex-wing rotary cutters lead the way with innovative design, superior durability, and proven performance. Valuable features are included such as a dome-shaped smooth deck, which prevent water and debris from accumulating on the top of the machine and makes it easy to clean up.

 

Built with a superior structural design that will satisfy different applications and segment desires, the single deck on the flex-wing cutters adds volume on the cutting chamber, allowing the machine to process more material and translating into an improvement in cut quality. The cutting chamber design allows the material to flow through the area and be discharged evenly throughout the width of the machine.

 

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields and lighting kits to comply with U.S. regulations. John Deere rotary cutters continue to advance in value with larger, more powerful gearboxes, and updated constant-velocity (CV) drivelines.

 

Here are situations when a rotary cutter provides value:

  • Clipping pastures encourages grass growth, optimizing on valuable pasture acreage.
  • Cutting grass and stalks helps control insects.
  • Routine cutting keeps weeds from reseeding.
  • It is the most cost-efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
  • Cutting grass waterways encourages root development and helps prevent erosion.
  • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
  • Clearing out brush is easy.
  • Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

  1. The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be to perform efficiently during mowing hours.
  2. The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
  3. Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.
  4. Choose the right features to satisfy specific needs – check out the value and benefits for each option to determine which one is the best fit for the work

John Deere flex-wing rotary cutters are available in three duty-level categories and four width sizes.

 

E-Series Flex-Wing Cutters are designed for your utility tractor to increase efficiency in each pass. They are ideal for making short work of grass, weeds, small bushes, and light shrubs.

 

The E Series is a rotary cutter that targets small farm owners and large homesteads, but with its 5.1-cm (2-in.) diameter cut capacity, it is applicable for all types of livestock pastures, as well as general mid-duty property maintenance applications. Improved pasture maintenance results in better growth of edible plant material. The E Series allows flex-wing operators to use a smaller tractor with a minimum 29.8 power take-off (PTO) kW (40 PTO hp), which means fuel savings. It is available both in 4.6-m (15-ft) and 3.6-m (12-ft) sizes, providing increases productivity and terrain coverage.

 

The E Series is equipped with a 540-rpm Category 5 driveline, rigid axles with four puncture-proof laminated tires, and round pan-type blade holders. The E Series shares many design features of the M and R Series, such as the easy-clean deck, round blade pans, and a cast self-leveling clevis hitch.

 

M-Series Flex-Wing Cutters are suited for larger property owners and ag producers.

 

A flex-wing rotary cutter is the best way to go when dealing with large areas and uneven terrain. Get a lot done on the job and then fold up the wings for easy transport. Choices include 540 PTO rpm or 1000 PTO rpm, laminated or severe-duty ag tires, and round stump jumper or bar-type blade holder. Put these M-Series Rotary Cutters to work reclaiming overgrown pastures, mowing rights-of-way, and chopping row-crop residue. With the redesigned cutting chamber, you are ready with great capacity and better crop flow. That means an unrestricted airflow, which translates into cleaner cutting and more uniform distribution of cut material.

 

A tractor with a minimum of 41 PTO kW (55 PTO hp) is required. The type and volume of material being cut will affect horsepower requirements.

 

R-Series Cutters are designed to multi-task in tough conditions, from cleaning roadside ditches to cutting under power line easements, recovering Conservation Reserve Program (CRP) land, airfield mowing, and road-rail verges. The R-Series range is ideal for contractors and government users requiring an industrial-strength machine with a narrow road transport width.

 

The R-Series Flex-Wing Rotary Cutter was engineered for the toughest roadside mowing and commercial applications. It comes in the standard 4.6-m (15-ft) and 6.1-m (20-ft) dual-wing configurations and in a right-wing-only weight-box configuration.

 

The 3.1-m (10-ft) FC10R Weight-Box Rotary Cutter is designed from the FC15R base model and incorporates many of the same features, but it is specifically enhanced for roadside cutting. The left wing of the cutter is removed and replaced with a weight box to provide stability for the unit. This allows the tractor to be operated alongside the road for mowing. Municipalities and commercial mowing operators utilize these units for roadside mowing where a full-sized unit is too wide and where the desired roadside cutting width is less. It is available in 540 rpm only.

 

The main difference between the R-spec and M-spec models is that the R-spec is a heavier, more durable rotary cutter that can handle more challenging conditions and terrains for longer working times. A thicker deck, standard deck rings, ball hitch, independent wing hydraulics, and larger tires.

 

The terrain and type and volume of material being cut affect horsepower requirements.

 

  • E-spec
    • Sizes: 3.7-m (12-ft) and 4.6-m (15-ft)
    • E-spec models cut brush up to 50.8 mm (2 in.) in diameter
    • Two tire options to choose from
    • One selective control valve (SCV) hydraulic connection
    • Available in 540 rpm
    • Tractor compatibility – see chart
    • Great choice for the property owners with light-duty applications
  • M-spec
    • Sizes: 4.6-m (15-ft) and 6.1-m (20-ft)
    • M-spec models cut brush up to 76.2 mm (3 in.) in diameter
    • Additional options may be included to suit specific needs
    • Optional availability to increase drivetrain capacity
    • Two SCV hydraulic connections
    • Available in 540 or 1000 rpm
    • Good match for medium-duty customers and their versatile jobs
  • R-spec
    • Sizes: 3.05-m (10-ft), 4.6-m (15-ft), and 6.1-m (20-ft)
    • Three SCV hydraulic connections
    • R-spec models cut brush up to 101.6 mm (4 in.) in diameter
    • Available in 540 or 1000 rpm (FC10R only available in 540 rpm)
    • Excellent for roadside mowing and more demanding applications

Area cut with John Deere rotary cutters

 

Acres per hour chart

 

Rotary cutter width Acres per hour Minutes per acre
1.2 m (4 ft) 2 29
1.5 m (5 ft) 2.5 23
1.8 m (6 ft) 3 20
2.1 m (7 ft) 3.5 16
2.4 m  (8 ft) 4 14
3.05 m (10 ft) 5 12
3.7 m (12 ft) 6 10
4.3 m (14 ft) 7 8
4.6 m (15 ft) 7.5 8
6.1 m (20 ft) 10 6

 

NOTE:

  1. Tractor speed of 8 km/h (5 mph) used in calculations.
  2. Values are an approximation, and speeds and time will vary based on terrain, tractor, rotary cutter, vegetation, and weather.
  3. Reduced by 17 percent allowing for overlaps, turns, and stops.

Warranty

Five-year limited gearbox warranty provided on every John Deere rotary cutter
Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

 

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Maintenance

 Easy-clean deck top Easy-clean deck top

John Deere flex-wing rotary cutters are equipped with an easy-clean, smooth-top single deck that allows material, debris, and water to be easily removed from the top of the machine.

  • Features

    Features

    • PTO HP: 75 hp (56 kW)

    • Working Width: 20 ft. (6.1 m)

    • Hitch Type: Standard clevis / ball type optional (self-level)

  • Specifications

    Specifications

    Blades - Blade holder:
    Type
    Round stump jumper for maximum protection for blade carrier against obstruction damage
    Blades - Blade tip speed:
    540 RPM
    86.6 m/s
    284.1 fps
    Blades - Overlap:
    152 mm
    6 in.
    Blades - Thickness:
    13 mm
    0.5 in.
    Blades - Type:
    Suction
    Blades - Width:
    102 mm
    4 in.
    Capacity - Cutting capacity (diameter):
    50.8 mm
    2 in.
    Capacity - Cutting chamber depth:
    254 mm
    10 in.
    Capacity - Cutting height:
    25.4-406.4 mm
    1-16 in.
    Capacity - Cutting width:
    3.7 m
    12 ft
    Dimensions - Approx. weight:
    1623 kg
    3580 lb
    Dimensions - Deck shape:
    Easy-clean dome-shaped top deck
    Dimensions - Deck thickness:
    11 gauge - 3 mm
    0.12 in.
    Dimensions - Deck type:
    Single dome deck
    Dimensions - Hinges:
    Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
    Dimensions - Overall length:
    4.8 m
    15.7 ft
    Dimensions - Overall width:
    3.8 m
    12.4 ft
    Dimensions - Shirt thickness:
    3 gauge - 6 mm
    0.24 in.
    Dimensions - Transport width:
    7.5 ft (2.3 m) at wing wheels
    Drivelines - Protection:
    Connecting
    No-seize, slip-clutch driveline
    Drivelines - Size:
    Main
    CV ASAE Category 4, splined telescoping profiles
    Connecting
    ASAE Category 4, splined telescoping profiles
    Gearcases - HP rating:
    Transfer
    Continuous: 186 kW
    250 hp
    Peak: 224 kW
    300 hp
    Center
    Continuous: 56 kW
    75 hp
    Peak: 75 kW
    100 hp
    Outer
    Continuous: 56 kW
    75 hp
    Peak: 75 kW
    100 hp
    Gearcases - Number:
    4
    Hitch - Jackstand:
    Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
    Hitch - Type:
    Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
    Hydraulics - Wing flex:
    For transport: upward 90 degree (angle)
    Working angles: upward 45 degree (angle)
    downward 22 degree (angle)
    Hydraulics - Wing lift:
    Simultaneous
    Key Specs - Approx. weight:
    1623 kg
    3580 lb
    Key Specs - Blade tip speed - 540 rpm - 1000 rpm:
    86.6 m/s
    284.1 fps
    Key Specs - Cutting capacity (diameter):
    50.8 mm
    2 in.
    Key Specs - Cutting width:
    3.7 m
    12 ft
    Key Specs - Deck thickness - upper - lower:
    11 gauge - 3 mm
    0.12 in.
    Key Specs - Drivelines - Size - Main:
    CV ASAE Category 4, splined telescoping profiles
    Key Specs - Gearboxes:
    Five years
    Key Specs - Shirt thickness:
    3 gauge - 6 mm
    0.24 in.
    Key Specs - Tractor PTO HP range:
    30 kW
    40 hp
    Key Specs - Transport width:
    7.5 ft (2.3 m) at wing wheels
    Shielding - Front:
    Single-row chain guard
    Shielding - Rear:
    Single-row chain guard
    Tractor compatibility - Tractor PTO:
    540 rpm
    Tractor compatibility - Tractor PTO HP range:
    30 kW
    40 hp
    Warranty - Gearboxes:
    Five years
    Wheels - Row width adjustment:
    No
    Wheels - Suspension:
    No suspension - rigid back axle
    Wheels - Type:
    Option 1
    4-bolt, laminated: 21x5.25x9
    Option 2
    4-bolt, 16PR severe-duty ag: 21x7x12
    Wheels - Wing-leveling adjustment:
    Easy adjust turnbuckle with bearing
  • Details

    Safety

    John Deere flex-wing rotary cutters are equipped with chains and lights as standard in all models.

    Front and rear safety chains
    Front safety chains Front safety chains

    Chain shields offer protection to the operator and the area surrounding the cutter yet allow uncut material to pass into the cutting chamber with minimal restriction.

    Optional double-row chains for R-spec models Optional double-row chains for R-spec models

    An extra row of chain shields for the front, back or both sides can be added for increased protection against debris coming from the cutting chamber.

    Lighting kit
    Lighting kit Lighting kit

    Lights are required for U.S. regulations on implements wider than 3.05 m (10 ft). All cutters come standard from the factory with lights.

    Transport lock
    Transport lock on back axle Transport lock on back axle
    Transport lock on wings Transport lock on wings

    The center axle can be locked easily for transport or service by flipping the lock over the cylinder rod. Wing locks use a pin that can be conveniently stored when not in use. Additionally, on M and R Series, the wing locks are spring-loaded so they can unfold against gravity on slopes up to 5 degrees. Always use the transport lock on the wings and center axle while transporting or moving the machine.

     

     

     

    What is the best cutter for your job?

    NOTE: Only for E, M, and R flex-wing models.

     

    John Deere flex-wing rotary cutters lead the way with innovative design, superior durability, and proven performance. Valuable features are included such as a dome-shaped smooth deck, which prevent water and debris from accumulating on the top of the machine and makes it easy to clean up.

     

    Built with a superior structural design that will satisfy different applications and segment desires, the single deck on the flex-wing cutters adds volume on the cutting chamber, allowing the machine to process more material and translating into an improvement in cut quality. The cutting chamber design allows the material to flow through the area and be discharged evenly throughout the width of the machine.

     

    To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields and lighting kits to comply with U.S. regulations. John Deere rotary cutters continue to advance in value with larger, more powerful gearboxes, and updated constant-velocity (CV) drivelines.

     

    Here are situations when a rotary cutter provides value:

    • Clipping pastures encourages grass growth, optimizing on valuable pasture acreage.
    • Cutting grass and stalks helps control insects.
    • Routine cutting keeps weeds from reseeding.
    • It is the most cost-efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
    • Cutting grass waterways encourages root development and helps prevent erosion.
    • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
    • Clearing out brush is easy.
    • Control undergrowth and grass in orchards, vineyards, and groves.

    Decide what model to use based on:

    1. The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be to perform efficiently during mowing hours.
    2. The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
    3. Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.
    4. Choose the right features to satisfy specific needs – check out the value and benefits for each option to determine which one is the best fit for the work

    John Deere flex-wing rotary cutters are available in three duty-level categories and four width sizes.

     

    E-Series Flex-Wing Cutters are designed for your utility tractor to increase efficiency in each pass. They are ideal for making short work of grass, weeds, small bushes, and light shrubs.

     

    The E Series is a rotary cutter that targets small farm owners and large homesteads, but with its 5.1-cm (2-in.) diameter cut capacity, it is applicable for all types of livestock pastures, as well as general mid-duty property maintenance applications. Improved pasture maintenance results in better growth of edible plant material. The E Series allows flex-wing operators to use a smaller tractor with a minimum 29.8 power take-off (PTO) kW (40 PTO hp), which means fuel savings. It is available both in 4.6-m (15-ft) and 3.6-m (12-ft) sizes, providing increases productivity and terrain coverage.

     

    The E Series is equipped with a 540-rpm Category 5 driveline, rigid axles with four puncture-proof laminated tires, and round pan-type blade holders. The E Series shares many design features of the M and R Series, such as the easy-clean deck, round blade pans, and a cast self-leveling clevis hitch.

     

    M-Series Flex-Wing Cutters are suited for larger property owners and ag producers.

     

    A flex-wing rotary cutter is the best way to go when dealing with large areas and uneven terrain. Get a lot done on the job and then fold up the wings for easy transport. Choices include 540 PTO rpm or 1000 PTO rpm, laminated or severe-duty ag tires, and round stump jumper or bar-type blade holder. Put these M-Series Rotary Cutters to work reclaiming overgrown pastures, mowing rights-of-way, and chopping row-crop residue. With the redesigned cutting chamber, you are ready with great capacity and better crop flow. That means an unrestricted airflow, which translates into cleaner cutting and more uniform distribution of cut material.

     

    A tractor with a minimum of 41 PTO kW (55 PTO hp) is required. The type and volume of material being cut will affect horsepower requirements.

     

    R-Series Cutters are designed to multi-task in tough conditions, from cleaning roadside ditches to cutting under power line easements, recovering Conservation Reserve Program (CRP) land, airfield mowing, and road-rail verges. The R-Series range is ideal for contractors and government users requiring an industrial-strength machine with a narrow road transport width.

     

    The R-Series Flex-Wing Rotary Cutter was engineered for the toughest roadside mowing and commercial applications. It comes in the standard 4.6-m (15-ft) and 6.1-m (20-ft) dual-wing configurations and in a right-wing-only weight-box configuration.

     

    The 3.1-m (10-ft) FC10R Weight-Box Rotary Cutter is designed from the FC15R base model and incorporates many of the same features, but it is specifically enhanced for roadside cutting. The left wing of the cutter is removed and replaced with a weight box to provide stability for the unit. This allows the tractor to be operated alongside the road for mowing. Municipalities and commercial mowing operators utilize these units for roadside mowing where a full-sized unit is too wide and where the desired roadside cutting width is less. It is available in 540 rpm only.

     

    The main difference between the R-spec and M-spec models is that the R-spec is a heavier, more durable rotary cutter that can handle more challenging conditions and terrains for longer working times. A thicker deck, standard deck rings, ball hitch, independent wing hydraulics, and larger tires.

     

    The terrain and type and volume of material being cut affect horsepower requirements.

     

    • E-spec
      • Sizes: 3.7-m (12-ft) and 4.6-m (15-ft)
      • E-spec models cut brush up to 50.8 mm (2 in.) in diameter
      • Two tire options to choose from
      • One selective control valve (SCV) hydraulic connection
      • Available in 540 rpm
      • Tractor compatibility – see chart
      • Great choice for the property owners with light-duty applications
    • M-spec
      • Sizes: 4.6-m (15-ft) and 6.1-m (20-ft)
      • M-spec models cut brush up to 76.2 mm (3 in.) in diameter
      • Additional options may be included to suit specific needs
      • Optional availability to increase drivetrain capacity
      • Two SCV hydraulic connections
      • Available in 540 or 1000 rpm
      • Good match for medium-duty customers and their versatile jobs
    • R-spec
      • Sizes: 3.05-m (10-ft), 4.6-m (15-ft), and 6.1-m (20-ft)
      • Three SCV hydraulic connections
      • R-spec models cut brush up to 101.6 mm (4 in.) in diameter
      • Available in 540 or 1000 rpm (FC10R only available in 540 rpm)
      • Excellent for roadside mowing and more demanding applications

    Area cut with John Deere rotary cutters

     

    Acres per hour chart

     

    Rotary cutter width Acres per hour Minutes per acre
    1.2 m (4 ft) 2 29
    1.5 m (5 ft) 2.5 23
    1.8 m (6 ft) 3 20
    2.1 m (7 ft) 3.5 16
    2.4 m  (8 ft) 4 14
    3.05 m (10 ft) 5 12
    3.7 m (12 ft) 6 10
    4.3 m (14 ft) 7 8
    4.6 m (15 ft) 7.5 8
    6.1 m (20 ft) 10 6

     

    NOTE:

    1. Tractor speed of 8 km/h (5 mph) used in calculations.
    2. Values are an approximation, and speeds and time will vary based on terrain, tractor, rotary cutter, vegetation, and weather.
    3. Reduced by 17 percent allowing for overlaps, turns, and stops.

    Warranty

    Five-year limited gearbox warranty provided on every John Deere rotary cutter
    Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
    Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

    John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

     

    There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

    Maintenance

     Easy-clean deck top Easy-clean deck top

    John Deere flex-wing rotary cutters are equipped with an easy-clean, smooth-top single deck that allows material, debris, and water to be easily removed from the top of the machine.

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.