John Deere 320R Loader
| Make | John Deere |
| Model | 320R |
| Type | Front End Loaders for Tractors |
Your Preferred Location
Description
- Compatible with 3R Series Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Quik-Change attachment carrier makes it easier and faster to move from chore to chore
- 1,122 pounds (509 kg) lift capacity
Models
Quik-change attachment carrier
Quik-change attachment carrier
Allows fast, easy removal/mounting of attachments without tools.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locations
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
Specifications
- Key Specs - Boom breakout force: Measured at pivot (Y)<br/>1710 kgf<br/>3769 lbf<br/>Measured at 500 mm ahead of pivot (Z)<br/>1209 kgf<br/>2665 lbf<br/>
- Key Specs - Bucket rollback force capacity: At ground-level line (ZZ)<br/>1335.4 kgf<br/>2944 lbf<br/>
- Key Specs - Clearance at full height - bucket dumped (C): 2003 kgf<br/>78.8 lbf
- Key Specs - Dump angle, degrees (E): 49.3 degree (angle)
- Key Specs - Lift capacity at full height: Measured at pivot (U)<br/>633 kgf<br/>1393 lbf<br/>Measured at 500 mm ahead of pivot (V)<br/>457 kgf<br/>1005 lbf<br/>
- Key Specs - Maximum lift height (A): 2616 mm<br/>103.3 in.
- Key Specs - Rollback angle, degrees (G): 23.8 degree (angle)
- Loader - Base weight: 281.09 kg
- Loader - Boom breakout force: Measured at pivot (Y)<br/>1710 kgf<br/>3769 lbf<br/>Measured at 500 mm ahead of pivot (Z)<br/>1209 kgf<br/>2665 lbf<br/>
- Loader - Bucket angle: Dump angle, degrees (E)<br/>49.3 degree (angle)<br/>Rollback angle, degrees (G)<br/>23.8 degree (angle)<br/>Dump angle, ground<br/>138 degree (angle)<br/>
- Loader - Bucket rollback force capacity: At maximum height (VV)<br/>822 kgf<br/>1819 lbf<br/>At 59-in. (1500-mm) lift height (XX)<br/>1397 kgf<br/>3079 lbf<br/>At ground-level line (ZZ)<br/>1335.4 kgf<br/>2944 lbf<br/>
- Loader - Bucket used: Materials
- Loader - Bucket weight: 93.8 kg<br/>207 lb
- Loader - Cycle times: Loader raise, seconds<br/>3.6 seconds<br/>Loader lower, seconds<br/>2.1 seconds<br/>Bucket dump, seconds<br/>3.0 / 1.2 (with regen) seconds<br/>Bucket rollback, seconds<br/>1.8 seconds<br/>
- Loader - Digging depth (H): 121 mm<br/>4.76 in.
- Loader - Dimensions: Maximum lift height (A)<br/>2616 mm<br/>103.3 in.<br/>At full height - bucket level(B)<br/>2411 mm<br/>94.9 in.<br/>At full height - bucket dumped (C)<br/>2003 mm<br/>78.8 in.<br/>
- Loader - Lift capacity at 59 in. (1500 mm): Measured at pivot (W)<br/>959 kgf<br/>2109 lbf<br/>Measured at 500 mm ahead of pivot (X)<br/>745 kgf<br/>1639 lbf<br/>
- Loader - Lift capacity at full height: Measured at pivot (U)<br/>633 kgf<br/>1393 lbf<br/>Measured at 500 mm ahead of pivot (V)<br/>457 kgf<br/>1005 lbf<br/>
- Loader - Overall length (I+F), ft (m): 3.218 m<br/>10.55 ft
- Loader - Reach: At maximum height (D)<br/>766 mm<br/>30.1 in.<br/>At ground level - bucket level (F)<br/>1491 mm<br/>50.7 in.<br/>
- Tractor - Front tire: 10-16.5 6PR R4T1
- Tractor - Model: 4105
- Tractor - Pump capacity: 5.7 gpm
- Tractor - Rated pressure: 2500 psi
- Tractor - Rear tire: 17.52-24 8PR R4T1
- Tractor - Wheelbase: 1727 mm<br/>68 in.
Features
- Lift Height: 82 in. (2.593 m)
- Lift Capacity: 1,122 lbs (509 kg)
Copy Set
Quik-change attachment carrier
Quik-change attachment carrier
Allows fast, easy removal/mounting of attachments without tools.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locations
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.