X330 Lawn Tractor with 42-inch Deck
  • 1.9% for 48 months!*

  • 22-hp (16.4-kW)* Cyclonic engine

  • 42-in. (107-cm) Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology

  • Twin Touch™ forward and reverse foot pedals

  • 4 year/300 hour bumper-to-bumper warranty

*Offer valid on qualifying purchases made 01 February 2024 through 30 April 2024. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. Down payment may be required. 1.9% APR is for 48 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 23.50% APR (as of 01 September 2023). Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

Features

  • Engine: 22 hp* Cyclonic

  • MulchControl™ Kit Options: Standard or one-touch MulchControl™

  • Deck: 42-in Accel Deep™ Mower Deck

  • Steering: Low-effort 2-wheel

Specifications

Additional information - Date collected:
3-Oct-22
Additional information - Manufacturing location:
Horicon, Wisconsin, USA
Buyer's notes - Notes:
Fully enclosed, molded-in color material reduces sound, will not rust or dent
Durable E-coat primer and powder-paint finish
Buyer's notes - Warranty:
4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Chassis - Cup holder:
Yes
Chassis - Equipment mounting:
Yes, heavy duty
Chassis - Fender deck material:
Stamped steel
Chassis - Fender handles/grips:
No
Chassis - Floor mats:
Sure-grip rubber
Chassis - Frame:
Welded heavy-duty
Chassis - Front axle:
Cast iron front axle, front wheel ball bearings
Chassis - Front tires:
15x6-6
Chassis - Hood material:
Fully enclosed, molded-in color material reduces sound, will not rust or dent
Chassis - Maximum towing capacity:
600 lb
272 kg
Chassis - Primer/paint:
E-coat/powder
Chassis - Rear tires:
20x10-8
Chassis - Receiver hitch:
No
Chassis - Service interval decal:
Yes
Chassis - Spindle bushings:
No
Chassis - Storage:
Yes, under seat and covered toolbox
Chassis - Weight bracket:
Standard rear, optional front
Dimensions - Height:
46.1 in.
1171 mm
Dimensions - Overall length:
71.5 in.
1817 mm
Dimensions - Weight:
Mower, no fuel: 542 lb
246 kg
Dimensions - Wheelbase:
49.4 in.
1255 mm
Dimensions - Width with mower:
50.5 in.
1283 mm
Dimensions - Width with mower (deflector raised for storage):
51.2 in.
1300 mm
Dimensions - Width without mower:
38 in.
964 mm
Electrical system - 12-V outlet:
Optional
Electrical system - Backup lights:
No
Electrical system - Battery:
12 V
340 CCA
Electrical system - Charging system:
Flywheel alternator, regulated, 14 amp
Electrical system - Engine starter:
Bendix
Electrical system - Headlights:
Two standard, incandescent, 27 W
Electrical system - Hour meter:
Yes
Electrical system - Rear work lights:
No
Electrical system - Taillights or reflector:
No
Engine - Air cleaner:
Dry, replaceable
Engine - Choke/speed control:
Separate levers, automatic choke return
Engine - Cooling method:
Air
Engine - Cylinders:
V-twin, cast-iron liners
Engine - Displacement:
44.2 cu in.
724 cc
Engine - Governor:
Mechanical
Engine - Manufacturer/model:
44J6 Cyclonic
Engine - Oil change:
No-tools oil drain hose with replaceable filter
Engine - Power:
22 hp
16.4 kW
Engine - Type:
Overhead valve, full-pressure lube, oil filter
Fuel system - Fuel delivery:
Pulse pump, carburetor
Fuel system - Fuel fill opening:
On left fender, 3 in.
7.6 cm
Fuel system - Fuel gauge:
Gauge on dash
Fuel system - Fuel tank capacity:
3.3 U.S. gal.
12.5 L
Fuel system - Fuel tank location:
Rear
Fuel system - Type:
Gasoline
Key Specs - Cutting width:
Accel Deep™ mower deck, 42 in.
107 cm
Key Specs - Engine manufacturer/model:
44J6 Cyclonic
Key Specs - Engine power:
22 hp
16.4 kW
Key Specs - Lift system type:
Foot pedal with optional adjustable spring assist kit
Key Specs - Oil change:
No-tools oil drain hose with replaceable filter
Key Specs - Rear tires:
20x10-8
Key Specs - Transaxle control:
Twin Touch™ pedals
Key Specs - Transaxle type:
K46 hydrostatic integrated with transaxle
Key Specs - U.S. warranty:
4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Lift system - Cut height increments:
0.25 in.
0.64 cm
Lift system - Hydraulic outlets:
No
Lift system - Mower cut height:
13 positions, 1-4 in.
2.5-10.2 cm
Lift system - Preset cut height:
Yes
Lift system - Type:
Foot pedal with optional adjustable spring assist kit
Mower attachability - Drive system:
Single belt
Mower attachability - Front draft arms:
Attached with spring pins at two points
Mower attachability - Mower wheels rotate:
No
Mower attachability - Rear draft arms:
Two pins and spring clips
Mower attachability - Type:
Slide under tractor
Mower deck - Construction:
Stamped steel deck shell
Mower deck - Cutting width:
Accel Deep™ mower deck, 42 in.
107 cm
Mower deck - Mower deck material:
12 gauge
0.105 in.
2.7 mm
Mower deck - Mower drive system:
Electric power take-off (PTO) clutch, in-line belt
Mower deck - Mower level adjustment:
Exact Adjust ports and onboard deck-leveling gauge
Mower deck - Mower wash port:
Yes
Mower deck - Mower wheel adjustment:
Four-position, tool required
Mower deck - Mower wheels:
Two
Mower deck - Type:
Side discharge
Optional equipment - Brush guard:
Yes
Optional equipment - Bucket holder:
Yes, double bucket
Optional equipment - Front blade:
44 in.
111.8 cm
Optional equipment - Front bumper:
Styled bumper option
Optional equipment - Front thatcher:
38, 46, 54 in.
96.5, 116.8, 137.2 cm
Optional equipment - Grass striping:
Lawn striping kit
Optional equipment - Mowers:
42A (standard)
Optional equipment - Mulching system:
Yes, MulchControl™
Optional equipment - Rear bagger:
2-bag, 7 bu
247 L
Optional equipment - Snow blower:
Two-stage, 44 in.
111.8 cm
Optional equipment - Sprayer:
Tow-behind, 15 U.S. gal.
56.8 L
Tow-behind, 25 U.S. gal.
94.6 L
Mounted, 25 U.S. gal.
Optional equipment - Spreader:
Tow-behind, 125 lb
57.7 kg
Tow-behind, 175 lb
79.4 kg
Mounted 125 lb
Optional equipment - Sun canopy:
Yes
Optional equipment - Tow-behind tools:
16
Optional equipment - Tractor shovel:
40 in.
101.6 cm
Optional equipment - Weather protection:
Weather enclosure
Safety - Backup protection:
Reverse Implement Option (RIO)
Safety - Meets ANSI standard:
Yes
Safety - Meets OPEI standard:
Yes
Safety - Safety video:
Yes
Seat - Armrests:
No
Seat - Fore-aft adjustment:
While seated, ball bearing slide rail, 15-position, 6.6 in.
17 cm
Seat - Seat back height:
15 in.
38 cm
Seat - Seat suspension:
Tilt, two coil springs, three-position no-tools adjustment for operator weight
Seat - Type:
Open-back design with grasp
Steering - Four-wheel steer:
Not available on this model
Steering - Steering wheel:
Large, 14 in.
35.6 cm
Steering - Tilt steering wheel:
No
Steering - Turning radius:
16 in.
40.6 cm
Steering - Type:
Manual, sector and pinion
Steering - Uncut circle radius:
26 in.
66 cm
Transaxle - Brakes:
Internal wet disc
Transaxle - Control:
Twin Touch™ pedals
Transaxle - Cruise control:
Yes, button on dash
Transaxle - Differential lock:
No
Transaxle - Forward speed:
0-5.5 mph
0-8.9 km/h
Transaxle - Oil cooler:
Fins and fan on transaxle
Transaxle - Oil filter:
Internal, not replaceable
Transaxle - Reverse speed:
0-4 mph
0-6.4 km/h
Transaxle - Type:
K46 hydrostatic integrated with transaxle

42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

X350 with Accel Deep 42A Mower Deck X350 with Accel Deep 42A Mower Deck

The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

  • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, help reduce scalping
  • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
  • Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
  • For use on X330, X350, X354, and X370 Tractors
Excellent cut quality
42A Mower Deck underside 42A Mower Deck underside

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
  • Exact Adjust deck-leveling system allows for easy and accurate leveling of the mower deck
Productivity - gets the job done fast

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

  • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening
Cleanliness - for the mower and the operator
Accel Deep 42A Mower Deck Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
    • Less need to clean and remove buildup of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
    • Limited amount of material to drift onto the operator and mower deck
    • Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck.
Superior durability is designed in
Hinged spindle pocket cover on the 42A Hinged spindle pocket cover on the 42A
Mower Deck Mower deck wheels are double captured for durability Mower Deck Mower deck wheels are double captured for durability

The 42A Mower Deck has strong spindle pockets to keep the blades aligned, even after years of tough service:

  • Ribs in the deck shell add strength where it is needed.
  • The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

Mower wheels are double captured:

  • Provides greater strength and durability for longer, trouble-free life.
  • Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes
Rear MulchControl baffle (A) that must be removed for bagging Rear MulchControl baffle (A) that must be removed for bagging
Rear MulchControl baffle removed to allow for chute installation Rear MulchControl baffle removed to allow for chute installation

The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

  • With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
  • The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.
7-bu (247-L) rear bagger
X350 with optional rear bagger X350 with optional rear bagger
Two-piece chute (ordered separately) Two-piece chute (ordered separately)

An optional 7-bu (247-L) cut-and-throw rear bagger material collection system (MCS) is available for use with the 42-in. (107-cm) Accel Deep Mower. It provides an efficient means of collecting grass clippings and leaves.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

  • 7-bu (247-L) capacity
  • Easy-to-attach two-peice chute (ordered separately)
  • Air exhaust duct
  • Convenient spring-latch
  • Airflow fill indicator
  • Quik-Tatch mounting
  • Sealed hopper top
  • Loose-knit bags available

 

Mower blades
Mower blades shipped with the rear bagger chute Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

  • High-lift bagging blades also work well when side discharging material.

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.


Mower blade use chart

 Mode(s) of operation  Mower blade
 Side discharging mode only  Side-discharge blade (shipped with mower) 
 Bagging mode only Bagging blade (shipped with rear bagger chute)
 Mulching mode only Mulching blade (shipped with MulchControl)
 Side discharge and mulching Mulching blade (shipped with MulchControl)
 Side discharge and bagging Bagging blade (shipped with rear bagger chute)
 Side discharge, mulching, and bagging Mulching blade (shipped with MulchControl)

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370) Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)
Kanzaki K58 transaxle (X380, X384, X390, X394) Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

  • Use of the latest valve designs has significantly reduced the sound level.
  • Large pump and motor rotating groups ensure long life and efficient operation.
Freewheeling valve
Freewheeling valve Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen MowerPlus home screen
MowerPlus maintenance screen MowerPlus maintenance screen
Overview

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Benefits
  • Engine hours, fuel level, and battery health (as compatible)
  • Mowing history with time, distance, area, and speed
  • Current day and five-day weather forecast based on location
  • Walk-through setup guides
  • Expert mowing tips
  • Useful attachments for future purchase
  • Periodic maintenance reminders
  • Safety instructions

 

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

Additional details

MowerPlus connectors (sold separately)

MowerPlus Hour Meter Connector MowerPlus Hour Meter Connector
MowerPlus Deluxe Smart Connector, with a phone MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

 

BUC10510 MowerPlus Hour Meter Connector is for use with:

  • Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
  • Model year 2015 to 2020 S240 Tractors (serial number -880,000)
  • S100, S110, S140, and S220 Tractors

 

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

  • All S120, S130, S160, S170, and S180 Tractors
  • Model year 2021 and newer S240 Tractors (serial number 880,001-)
  • Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

 

BUC10537 MowerPlus Smart Connector is for use with:

  • Model year 2016 and newer Select Series X300 and X500 Tractors

 

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

 

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

 

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Steering is low-effort sector and pinion system

Tight turning radius Tight turning radius

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

  • Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
  • Tight turning ability improves mowing efficiency
Easy steering

Easy steering is important for an enjoyable mowing experience:

  • Large, 14-in. (36-cm) diameter steering wheel for improved leverage
  • Large sector gear for improved (higher) steering ratio
    • A higher ratio equals lower steering effort
  • Dual drag links to help equalize the steering loads and reduce steering error
  • Ball joints on both ends of the steering tie rods for long life
  • Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
  • Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
  • Greaseable front steering spindles to reduce friction and improve wear over time

MulchControl™ system provides superior mulching performance and rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck) Lever-action MulchControl lever (shown on 48A mower deck)
Electric one-touch MulchControl switch Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • Creates a beautiful looking lawn
  • Smaller grass clippings disappear into the lawn canopy
  • Reduces fertilizer needs
  • Grass clippings are not blown onto the operator, driveways, or flower beds
  • No need to dispose of bags of clippings
How MulchControl works
MulchControl baffle open (shown on Z300 48A mower deck) MulchControl baffle open (shown on Z300 48A mower deck)
MulchControl baffle closed (shown on Z300 48A mower deck) MulchControl baffle closed (shown on Z300 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
  • The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
  • When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
  • When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side discharge, but would like to close the chute to control clippings in some areas
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

 

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switch	Electric one-touch MulchControl switch
Electric one-touch MulchControl actuator (shown on 54A mower deck) Electric one-touch MulchControl actuator (shown on 54A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

  • When approaching driveways or flower beds where clippings would be undesirable
  • When a breeze blows clippings back onto the operator
  • For side discharge mowing only the areas of the property where grass is too thick for mulching
  • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean­up is desired
  • 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments
Attachment Description Applications
BUC10704 42-in. (107-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705 48-in. (122-cm) Accel Deep MulchControl (lever action) S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706 54-in. (137-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
Electric one-touch MulchControl attachments
Attachment Description Applications
BUC11632 42-in. (107-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 Series Tractors*
BUC11633 48-in. (122-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*
BUC11634 54-in. (137-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*

*NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

  • The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
  • Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
  • Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
    • Weight bracket is built into the frame of two-wheel-steer models.
    • Four-wheel-steer models require the optional weight bracket.
Front axle and wheel spindles are heavy-duty
Cast-iron front axle and steering spindles Cast-iron front axle and steering spindles

Front axle is made of nodular cast iron:

  • Cast-iron front axle is strong and shock resistant.
  • Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

  • The bushing provides excellent wear resistance.
  • Grease fittings at each spindle are easy to service.

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

  • Have strength to handle heavy implements
  • Provide long life at bearing surfaces
  • Use sealed precision bearings in front wheels
Rear equipment-mounting system is heavy-duty and easy to use
Rear equipment mounting system Rear equipment mounting system

A heavy-duty equipment mounting system is used:

  • Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
  • Easily attach optional equipment to the tractor
  • Can bear the load of heavy rear-mounted equipment, such as material collection systems

Operator station is comfortable and convenient

Comfortable operator station Comfortable operator station

The operator station is designed for operator comfort and ease of using controls:

  • A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
  • Full-length foot mats provide comfort for the operator and protect the footrest area.
Comfortable seat
Comfortable open-back seat Comfortable open-back seat

An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

  • Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
  • Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
  • Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
  • Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.
Adjustable seat suspension
Seat suspension with springs in rear position Seat suspension with springs in rear position
Seat suspension with springs in forward position Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

  • Springs are adjustable fore and aft to any of three positions.
    • No tools required
    • Allows fine-tuning of the suspension for the operator's weight
    • Back position for more support for heavier operators
  • Tool tray is designed into the seat base.
    • Can be used to store gloves, small tools, etc.
    • Provides storage location for Exact Adjust tool and deck-leveling gauge
Cup holder and toolbox
Cup holder and covered toolbox on fender Cup holder and covered toolbox on fender
Covered toolbox with open cover Covered toolbox with open cover

A cup holder and covered toolbox are located on the fender for operator convenience:

  • The cup holder holds a variety of container sizes.
  • Toolbox provides convenient storage.
    • Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.
  • Cup holder and toolbox are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.
Removable plug for optional 12-V outlet
Location for optional 12-V outlet Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

  • Convenient for plugging in cell phone charger and other electric devices
    • Can be used to operate electric rear equipment, such as a sprayer or spreader
12-V fast connector
Fast connector location Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

  • The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Modern styling with functional design enhances appearance and performance

Attractive styling Attractive styling
Hood air-intake louvers Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

  • Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
    • Cooler engine operation
    • Lower operator station sound levels
  • Hot air is vented out the front grille, away from the operator.
  • The fully enclosed hood is made of molded-in-color material.
    • Reduces sound
    • Will not rust or dent
  • Distinctive grille and large, one-piece fender deck complete the styling package.
Two high-quality headlights give excellent visibility
Headlights Headlights

Headlights are standard equipment on all models:

  • Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
  • A headlight position on the ignition switch makes it easy to operate the headlights.
  • The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Cyclonic V-twin engine is smooth running and powerful

22-hp (16.4-kW) engine 22-hp (16.4-kW) engine

The 22-hp (16.4-kW) V-twin engine used in the Select Series™ X330 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Large, 44.2-cu in. (724-cc) displacement
    • Plenty of torque helps to get the job done fast.
    • Large displacement engine increases the ability to get an even cut without mowing a second time.
    • Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
  • Electronic ignition for fast starts
  • Cast-iron sleeves for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
  • Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
Cyclonic air filter
Air filter cover Air filter cover
Air filter with foam precleaner Air filter with foam precleaner

Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:

  • Cyclonic design ejects large dirt particles before they contact the filter.
  • Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
  • The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
Serviceability
Engine oil check/fill tube and oil-drain hose Engine oil check/fill tube and oil-drain hose
Oil drain hose Oil drain hose

Engine oil check and fill tube is conveniently located for easy access. Oil drain hose makes draining oil easy and clean.


Engine oil filter Engine oil filter

Replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.


Debris inspection port covers Debris inspection port covers
Debris inspection port Debris inspection port

Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 14-amp charging capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity
Fuel tank Fuel tank
Electronic fuel gauge Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

  • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
  • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
    • Located on the left fender
    • Helps eliminate spillage
  • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade 44-in. (112-cm) Front Blade
Snow blower, weather enclosure, and chains on an X300 Series Tractor Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 44-in. (112-cm) Front Blade
  • 48-in. (122-cm) Front Blade (X394 Tractor only)
  • Tire chains or TerraGrip traction belts
  • Weather enclosure (available for all X300 Series, except the X350R)
  • Weights

 

Serviceability is convenient with easy-open hood

One-piece hood is easy to open One-piece hood is easy to open
Service interval decal located under hood Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
Easy-to-service engine fuel and oil filters Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

 

Quick response (QR) codes link to owner information web pages
Example product identification number (PIN) label with QR code Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

  • Safety and how-to videos
  • Operator’s manuals
  • Parts catalog
  • Maintenance reminder sheets
  • Attachments
  • Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
Deck-leveling gauge and hex adjusting tool stored under tractor seat Deck-leveling gauge and hex adjusting tool stored under tractor seat
Exact Adjust access holes Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

  • There is no need to reach under the fender deck while making the mower-level adjustment.
  • Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
    • Level the mower deck side to side
    • Set the correct amount of rake (front-to-back deck orientation)
    • Calibrate the cutting height to the cut-height adjusting knob setting
  • Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
    • To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Deck-leveling tool placed under deck Deck-leveling tool placed under deck
Using included ball-hex tool to level mower deck Using included ball-hex tool to level mower deck

Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

  • Park the tractor on a level surface.
  • Inflate tires to the correct pressure.
  • Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
Cut height adjusting knob Cut height adjusting knob
  • Set mower cutting-height knob to the correct deck-leveling position.
  • Adjust mower wheels as necessary so they do not contact the ground surface.
  • Remove the onboard deck-leveling gauge that is located under the seat.
  • Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.
    • Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
  • Adjust mower deck front-to-back level, if necessary.
    • Loosen rear nuts equally on each side of front lift rod.
    • Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
    • Tighten rear nuts after adjustment is complete.
  • Return the gauge to its storage position. 

 

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Controls and display functions are easy to identify and convenient to use

X350 Tractor mowing X350 Tractor mowing
Steering wheel and controls (switch turned on to show display) Steering wheel and controls (switch turned on to show display)
Controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

  • Controls are color coded and labeled with English words for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
  • The reverse implement option (RIO) switch is a yellow button.
  • The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
  • Cruise control activation is handled by an automotive-style button.
  • Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
    • The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
  • Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
Display panel
Display panel Display panel
Display panel illustration with descriptions Display panel illustration with descriptions

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

  • Display features dark-cockpit design to minimize operator distractions.
  • Display is back lit for night visibility.
    • Night visibility is especially useful with snow blower use.
  • Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • Electronic fuel gauge provides real-time fuel level information.
    • The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.
  • A tachometer graphically displays engine speed.
    • Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
  • An indicator tells the operator when the PTO is operating.
  • Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
    • Damage can be prevented and repair costs can be reduced by addressing problems early.
  • Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
    • The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
  • Operators are advised if battery voltage is low, normal, or excessive.
  • The service indicator light illuminates to indicate a diagnostic error code is stored.
    • Onboard diagnostics provides trouble codes for use by trained technicians.
      • For example, a technician can test switch functionality and circuit continuity without tools.
Twin Touch™ foot control
Twin Touch foot control Twin Touch foot control
Cruise control Cruise control

Twin Touch foot pedals control the speed and direction of travel:

  • Automotive-type accelerator control ensures easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.
Cruise control

Cruise control is standard equipment:

  • To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
Cut height adjusting knob Cut height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

  • Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
  • Returns the mower deck to the same preset height each time it is lowered
Storage tray under tractor seat Storage tray under tractor seat
Exact Adjust tool is used to level mower deck Exact Adjust tool is used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

  • Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.
Deck-leveling gauge placed under deck Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

 

Foot-pedal lift system
Foot-pedal lift system Foot-pedal lift system

Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

  • The easy-to-use raised position lock operates similarly to the park brake lock.
  • The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
  • The mower deck returns to the same preset height each time it is lowered.
Adjustable lift-assist spring
Lift-assist spring decals and adjusting bolt Lift-assist spring decals and adjusting bolt
Close-up of lift-assist spring decal Close-up of lift-assist spring decal

NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

  • Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.
    • A spring-assist kit is available for other models for use with front equipment.
  • Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).
  • The mower will not be inadvertently locked in the raised position when mowing through ditches.
  • When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.
Parking brake control
Parking brake Parking brake

Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric PTO clutch is easy and convenient to use
Electric PTO switch Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch
PTO clutch PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

RIO
Reverse implement switch Reverse implement switch
Mower engagement PTO switch Mower engagement PTO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

  1. Stop forward travel. Allow attachment to run.
  2. Look down and behind the machine to be sure that there are no bystanders.
  3. Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
    NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
  4. Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
  5. Resume forward travel. The attachment should continue operating.
  6. Repeat procedure to position the machine again.

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

  • The warranty is hassle free, with one company handling all the paperwork.
  • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

  • Features

    Features

    • Engine: 22 hp* Cyclonic

    • MulchControl™ Kit Options: Standard or one-touch MulchControl™

    • Deck: 42-in Accel Deep™ Mower Deck

    • Steering: Low-effort 2-wheel

  • Specifications

    Specifications

    Additional information - Date collected:
    3-Oct-22
    Additional information - Manufacturing location:
    Horicon, Wisconsin, USA
    Buyer's notes - Notes:
    Fully enclosed, molded-in color material reduces sound, will not rust or dent
    Durable E-coat primer and powder-paint finish
    Buyer's notes - Warranty:
    4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
    Chassis - Cup holder:
    Yes
    Chassis - Equipment mounting:
    Yes, heavy duty
    Chassis - Fender deck material:
    Stamped steel
    Chassis - Fender handles/grips:
    No
    Chassis - Floor mats:
    Sure-grip rubber
    Chassis - Frame:
    Welded heavy-duty
    Chassis - Front axle:
    Cast iron front axle, front wheel ball bearings
    Chassis - Front tires:
    15x6-6
    Chassis - Hood material:
    Fully enclosed, molded-in color material reduces sound, will not rust or dent
    Chassis - Maximum towing capacity:
    600 lb
    272 kg
    Chassis - Primer/paint:
    E-coat/powder
    Chassis - Rear tires:
    20x10-8
    Chassis - Receiver hitch:
    No
    Chassis - Service interval decal:
    Yes
    Chassis - Spindle bushings:
    No
    Chassis - Storage:
    Yes, under seat and covered toolbox
    Chassis - Weight bracket:
    Standard rear, optional front
    Dimensions - Height:
    46.1 in.
    1171 mm
    Dimensions - Overall length:
    71.5 in.
    1817 mm
    Dimensions - Weight:
    Mower, no fuel: 542 lb
    246 kg
    Dimensions - Wheelbase:
    49.4 in.
    1255 mm
    Dimensions - Width with mower:
    50.5 in.
    1283 mm
    Dimensions - Width with mower (deflector raised for storage):
    51.2 in.
    1300 mm
    Dimensions - Width without mower:
    38 in.
    964 mm
    Electrical system - 12-V outlet:
    Optional
    Electrical system - Backup lights:
    No
    Electrical system - Battery:
    12 V
    340 CCA
    Electrical system - Charging system:
    Flywheel alternator, regulated, 14 amp
    Electrical system - Engine starter:
    Bendix
    Electrical system - Headlights:
    Two standard, incandescent, 27 W
    Electrical system - Hour meter:
    Yes
    Electrical system - Rear work lights:
    No
    Electrical system - Taillights or reflector:
    No
    Engine - Air cleaner:
    Dry, replaceable
    Engine - Choke/speed control:
    Separate levers, automatic choke return
    Engine - Cooling method:
    Air
    Engine - Cylinders:
    V-twin, cast-iron liners
    Engine - Displacement:
    44.2 cu in.
    724 cc
    Engine - Governor:
    Mechanical
    Engine - Manufacturer/model:
    44J6 Cyclonic
    Engine - Oil change:
    No-tools oil drain hose with replaceable filter
    Engine - Power:
    22 hp
    16.4 kW
    Engine - Type:
    Overhead valve, full-pressure lube, oil filter
    Fuel system - Fuel delivery:
    Pulse pump, carburetor
    Fuel system - Fuel fill opening:
    On left fender, 3 in.
    7.6 cm
    Fuel system - Fuel gauge:
    Gauge on dash
    Fuel system - Fuel tank capacity:
    3.3 U.S. gal.
    12.5 L
    Fuel system - Fuel tank location:
    Rear
    Fuel system - Type:
    Gasoline
    Key Specs - Cutting width:
    Accel Deep™ mower deck, 42 in.
    107 cm
    Key Specs - Engine manufacturer/model:
    44J6 Cyclonic
    Key Specs - Engine power:
    22 hp
    16.4 kW
    Key Specs - Lift system type:
    Foot pedal with optional adjustable spring assist kit
    Key Specs - Oil change:
    No-tools oil drain hose with replaceable filter
    Key Specs - Rear tires:
    20x10-8
    Key Specs - Transaxle control:
    Twin Touch™ pedals
    Key Specs - Transaxle type:
    K46 hydrostatic integrated with transaxle
    Key Specs - U.S. warranty:
    4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
    Lift system - Cut height increments:
    0.25 in.
    0.64 cm
    Lift system - Hydraulic outlets:
    No
    Lift system - Mower cut height:
    13 positions, 1-4 in.
    2.5-10.2 cm
    Lift system - Preset cut height:
    Yes
    Lift system - Type:
    Foot pedal with optional adjustable spring assist kit
    Mower attachability - Drive system:
    Single belt
    Mower attachability - Front draft arms:
    Attached with spring pins at two points
    Mower attachability - Mower wheels rotate:
    No
    Mower attachability - Rear draft arms:
    Two pins and spring clips
    Mower attachability - Type:
    Slide under tractor
    Mower deck - Construction:
    Stamped steel deck shell
    Mower deck - Cutting width:
    Accel Deep™ mower deck, 42 in.
    107 cm
    Mower deck - Mower deck material:
    12 gauge
    0.105 in.
    2.7 mm
    Mower deck - Mower drive system:
    Electric power take-off (PTO) clutch, in-line belt
    Mower deck - Mower level adjustment:
    Exact Adjust ports and onboard deck-leveling gauge
    Mower deck - Mower wash port:
    Yes
    Mower deck - Mower wheel adjustment:
    Four-position, tool required
    Mower deck - Mower wheels:
    Two
    Mower deck - Type:
    Side discharge
    Optional equipment - Brush guard:
    Yes
    Optional equipment - Bucket holder:
    Yes, double bucket
    Optional equipment - Front blade:
    44 in.
    111.8 cm
    Optional equipment - Front bumper:
    Styled bumper option
    Optional equipment - Front thatcher:
    38, 46, 54 in.
    96.5, 116.8, 137.2 cm
    Optional equipment - Grass striping:
    Lawn striping kit
    Optional equipment - Mowers:
    42A (standard)
    Optional equipment - Mulching system:
    Yes, MulchControl™
    Optional equipment - Rear bagger:
    2-bag, 7 bu
    247 L
    Optional equipment - Snow blower:
    Two-stage, 44 in.
    111.8 cm
    Optional equipment - Sprayer:
    Tow-behind, 15 U.S. gal.
    56.8 L
    Tow-behind, 25 U.S. gal.
    94.6 L
    Mounted, 25 U.S. gal.
    Optional equipment - Spreader:
    Tow-behind, 125 lb
    57.7 kg
    Tow-behind, 175 lb
    79.4 kg
    Mounted 125 lb
    Optional equipment - Sun canopy:
    Yes
    Optional equipment - Tow-behind tools:
    16
    Optional equipment - Tractor shovel:
    40 in.
    101.6 cm
    Optional equipment - Weather protection:
    Weather enclosure
    Safety - Backup protection:
    Reverse Implement Option (RIO)
    Safety - Meets ANSI standard:
    Yes
    Safety - Meets OPEI standard:
    Yes
    Safety - Safety video:
    Yes
    Seat - Armrests:
    No
    Seat - Fore-aft adjustment:
    While seated, ball bearing slide rail, 15-position, 6.6 in.
    17 cm
    Seat - Seat back height:
    15 in.
    38 cm
    Seat - Seat suspension:
    Tilt, two coil springs, three-position no-tools adjustment for operator weight
    Seat - Type:
    Open-back design with grasp
    Steering - Four-wheel steer:
    Not available on this model
    Steering - Steering wheel:
    Large, 14 in.
    35.6 cm
    Steering - Tilt steering wheel:
    No
    Steering - Turning radius:
    16 in.
    40.6 cm
    Steering - Type:
    Manual, sector and pinion
    Steering - Uncut circle radius:
    26 in.
    66 cm
    Transaxle - Brakes:
    Internal wet disc
    Transaxle - Control:
    Twin Touch™ pedals
    Transaxle - Cruise control:
    Yes, button on dash
    Transaxle - Differential lock:
    No
    Transaxle - Forward speed:
    0-5.5 mph
    0-8.9 km/h
    Transaxle - Oil cooler:
    Fins and fan on transaxle
    Transaxle - Oil filter:
    Internal, not replaceable
    Transaxle - Reverse speed:
    0-4 mph
    0-6.4 km/h
    Transaxle - Type:
    K46 hydrostatic integrated with transaxle
  • Details

    42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

    X350 with Accel Deep 42A Mower Deck X350 with Accel Deep 42A Mower Deck

    The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

    • 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
      • Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility
    • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
    • Mower deck suspended from the vehicle for a smooth and level cut
      • Adjustable mower wheels, positioned just above ground level, help reduce scalping
    • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
    • Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
    • For use on X330, X350, X354, and X370 Tractors
    Excellent cut quality
    42A Mower Deck underside 42A Mower Deck underside

    Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

    • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
      • Helps maintain excellent cut quality at faster mowing speeds
    • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
    • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
    • Exact Adjust deck-leveling system allows for easy and accurate leveling of the mower deck
    Productivity - gets the job done fast

    Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

    • Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

    Large discharge opening is both high and wide to handle more material:

    • Gives a smooth, even discharge of clippings at all mowing speeds
    • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
    • Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening
    Cleanliness - for the mower and the operator
    Accel Deep 42A Mower Deck Accel Deep 42A Mower Deck

    The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

    • There are few places to catch and hold material on top and underneath the deck.
      • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
      • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
      • Less need to clean and remove buildup of material from underside deck
    • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
      • Limited amount of material to drift onto the operator and mower deck
      • Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
      • Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

    Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

    • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
    Mower wash port Mower wash port
    Mower wash port with hose connector Mower wash port with hose connector

    A wash port is provided to make cleaning the underside of the mower deck easy.

    • Hose connector is included with the mower deck.
    Superior durability is designed in
    Hinged spindle pocket cover on the 42A Hinged spindle pocket cover on the 42A
    Mower Deck Mower deck wheels are double captured for durability Mower Deck Mower deck wheels are double captured for durability

    The 42A Mower Deck has strong spindle pockets to keep the blades aligned, even after years of tough service:

    • Ribs in the deck shell add strength where it is needed.
    • The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

    Mower wheels are double captured:

    • Provides greater strength and durability for longer, trouble-free life.
    • Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

    Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

    Rolled outer edge of the deck provides extra strength and protection.

    Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

    Versatility - easy to change between side discharge, mulch, and bagging modes
    Rear MulchControl baffle (A) that must be removed for bagging Rear MulchControl baffle (A) that must be removed for bagging
    Rear MulchControl baffle removed to allow for chute installation Rear MulchControl baffle removed to allow for chute installation

    The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

    • With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
    • The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.
    7-bu (247-L) rear bagger
    X350 with optional rear bagger X350 with optional rear bagger
    Two-piece chute (ordered separately) Two-piece chute (ordered separately)

    An optional 7-bu (247-L) cut-and-throw rear bagger material collection system (MCS) is available for use with the 42-in. (107-cm) Accel Deep Mower. It provides an efficient means of collecting grass clippings and leaves.

    The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

    • 7-bu (247-L) capacity
    • Easy-to-attach two-peice chute (ordered separately)
    • Air exhaust duct
    • Convenient spring-latch
    • Airflow fill indicator
    • Quik-Tatch mounting
    • Sealed hopper top
    • Loose-knit bags available

     

    Mower blades
    Mower blades shipped with the rear bagger chute Mower blades shipped with the rear bagger chute

    High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

    • High-lift bagging blades also work well when side discharging material.

    Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.


    Mower blade use chart

     Mode(s) of operation  Mower blade
     Side discharging mode only  Side-discharge blade (shipped with mower) 
     Bagging mode only Bagging blade (shipped with rear bagger chute)
     Mulching mode only Mulching blade (shipped with MulchControl)
     Side discharge and mulching Mulching blade (shipped with MulchControl)
     Side discharge and bagging Bagging blade (shipped with rear bagger chute)
     Side discharge, mulching, and bagging Mulching blade (shipped with MulchControl)

    Integrated hydrostatic transaxle efficiently transmits power to wheels

    Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370) Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)
    Kanzaki K58 transaxle (X380, X384, X390, X394) Kanzaki K58 transaxle (X380, X384, X390, X394)

    The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

    Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

    • Use of the latest valve designs has significantly reduced the sound level.
    • Large pump and motor rotating groups ensure long life and efficient operation.
    Freewheeling valve
    Freewheeling valve Freewheeling valve

    A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

    Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

    Help maintain your mower and lawn with the MowerPlus™ app and connector

    MowerPlus home screen MowerPlus home screen
    MowerPlus maintenance screen MowerPlus maintenance screen
    Overview

    Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

    Benefits
    • Engine hours, fuel level, and battery health (as compatible)
    • Mowing history with time, distance, area, and speed
    • Current day and five-day weather forecast based on location
    • Walk-through setup guides
    • Expert mowing tips
    • Useful attachments for future purchase
    • Periodic maintenance reminders
    • Safety instructions

     

    To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

    Additional details

    MowerPlus connectors (sold separately)

    MowerPlus Hour Meter Connector MowerPlus Hour Meter Connector
    MowerPlus Deluxe Smart Connector, with a phone MowerPlus Deluxe Smart Connector, with a phone

    Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

     

    BUC10510 MowerPlus Hour Meter Connector is for use with:

    • Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
    • Model year 2015 to 2020 S240 Tractors (serial number -880,000)
    • S100, S110, S140, and S220 Tractors

     

    BUC10929 MowerPlus Deluxe Smart Connector is for use with:

    • All S120, S130, S160, S170, and S180 Tractors
    • Model year 2021 and newer S240 Tractors (serial number 880,001-)
    • Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

     

    BUC10537 MowerPlus Smart Connector is for use with:

    • Model year 2016 and newer Select Series X300 and X500 Tractors

     

    All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

     

    MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

     

    Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

    Steering is low-effort sector and pinion system

    Tight turning radius Tight turning radius

    A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

    • Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
    • Tight turning ability improves mowing efficiency
    Easy steering

    Easy steering is important for an enjoyable mowing experience:

    • Large, 14-in. (36-cm) diameter steering wheel for improved leverage
    • Large sector gear for improved (higher) steering ratio
      • A higher ratio equals lower steering effort
    • Dual drag links to help equalize the steering loads and reduce steering error
    • Ball joints on both ends of the steering tie rods for long life
    • Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
    • Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
    • Greaseable front steering spindles to reduce friction and improve wear over time

    MulchControl™ system provides superior mulching performance and rapid conversion

    Lever-action MulchControl lever (shown on 48A mower deck) Lever-action MulchControl lever (shown on 48A mower deck)
    Electric one-touch MulchControl switch Electric one-touch MulchControl switch

    The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

    • Creates a beautiful looking lawn
    • Smaller grass clippings disappear into the lawn canopy
    • Reduces fertilizer needs
    • Grass clippings are not blown onto the operator, driveways, or flower beds
    • No need to dispose of bags of clippings
    How MulchControl works
    MulchControl baffle open (shown on Z300 48A mower deck) MulchControl baffle open (shown on Z300 48A mower deck)
    MulchControl baffle closed (shown on Z300 48A mower deck) MulchControl baffle closed (shown on Z300 48A mower deck)

    MulchControl is an innovative, simple design that is easy to use and maintain:

    • The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
    • The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
    • When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
    • When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

    MulchControl is well-suited to the following mowing situations:

    • For operators who usually mulch, but side discharge when grass gets too long
    • For operators who usually side discharge, but would like to close the chute to control clippings in some areas
    • For operators who always mulch a main lawn, but often side discharge secondary lawns
    • For operators who collect clippings but want to go farther before emptying the material collection system

    MulchControl puts the operator in control of the clippings.

     

    Electric one-touch MulchControl

    Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

    Electric one-touch MulchControl switch	Electric one-touch MulchControl switch
    Electric one-touch MulchControl actuator (shown on 54A mower deck) Electric one-touch MulchControl actuator (shown on 54A mower deck)

    Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

    • When approaching driveways or flower beds where clippings would be undesirable
    • When a breeze blows clippings back onto the operator
    • For side discharge mowing only the areas of the property where grass is too thick for mulching
    • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
    MulchControl limitations

    While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

    • When cutting strong southern grasses, such as Zoysia and Bermuda
    • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
    • When optimum bagging and lawn clean­up is desired
    • 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

    When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

    Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

    When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

    MulchControl compatibility

    Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

    Lever-action MulchControl attachments
    Attachment Description Applications
    BUC10704 42-in. (107-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
    BUC10705 48-in. (122-cm) Accel Deep MulchControl (lever action) S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
    BUC10706 54-in. (137-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
    Electric one-touch MulchControl attachments
    Attachment Description Applications
    BUC11632 42-in. (107-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 Series Tractors*
    BUC11633 48-in. (122-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*
    BUC11634 54-in. (137-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*

    *NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

    Frame is reliable heavy-duty welded steel

    Welded, heavy-duty frame Welded, heavy-duty frame

    The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

    • The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
    • Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
    • Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
      • Weight bracket is built into the frame of two-wheel-steer models.
      • Four-wheel-steer models require the optional weight bracket.
    Front axle and wheel spindles are heavy-duty
    Cast-iron front axle and steering spindles Cast-iron front axle and steering spindles

    Front axle is made of nodular cast iron:

    • Cast-iron front axle is strong and shock resistant.
    • Cast iron will not yield under heavy loads or impact.

    A replaceable bushing is used at axle mounting:

    • The bushing provides excellent wear resistance.
    • Grease fittings at each spindle are easy to service.

    Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

    • Have strength to handle heavy implements
    • Provide long life at bearing surfaces
    • Use sealed precision bearings in front wheels
    Rear equipment-mounting system is heavy-duty and easy to use
    Rear equipment mounting system Rear equipment mounting system

    A heavy-duty equipment mounting system is used:

    • Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
    • Easily attach optional equipment to the tractor
    • Can bear the load of heavy rear-mounted equipment, such as material collection systems

    Operator station is comfortable and convenient

    Comfortable operator station Comfortable operator station

    The operator station is designed for operator comfort and ease of using controls:

    • A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
    • Full-length foot mats provide comfort for the operator and protect the footrest area.
    Comfortable seat
    Comfortable open-back seat Comfortable open-back seat

    An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

    • Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
    • Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
    • Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
    • Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.
    Adjustable seat suspension
    Seat suspension with springs in rear position Seat suspension with springs in rear position
    Seat suspension with springs in forward position Seat suspension with springs in forward position

    The seat suspension is adjustable, without tools, for the weight of the operator:

    • Springs are adjustable fore and aft to any of three positions.
      • No tools required
      • Allows fine-tuning of the suspension for the operator's weight
      • Back position for more support for heavier operators
    • Tool tray is designed into the seat base.
      • Can be used to store gloves, small tools, etc.
      • Provides storage location for Exact Adjust tool and deck-leveling gauge
    Cup holder and toolbox
    Cup holder and covered toolbox on fender Cup holder and covered toolbox on fender
    Covered toolbox with open cover Covered toolbox with open cover

    A cup holder and covered toolbox are located on the fender for operator convenience:

    • The cup holder holds a variety of container sizes.
    • Toolbox provides convenient storage.
      • Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.
    • Cup holder and toolbox are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.
    Removable plug for optional 12-V outlet
    Location for optional 12-V outlet Location for optional 12-V outlet

    A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

    • Convenient for plugging in cell phone charger and other electric devices
      • Can be used to operate electric rear equipment, such as a sprayer or spreader
    12-V fast connector
    Fast connector location Fast connector location

    A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

    • The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

    Modern styling with functional design enhances appearance and performance

    Attractive styling Attractive styling
    Hood air-intake louvers Hood air-intake louvers

    Smooth, rounded contours present a modern, styled appearance:

    • Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
      • Cooler engine operation
      • Lower operator station sound levels
    • Hot air is vented out the front grille, away from the operator.
    • The fully enclosed hood is made of molded-in-color material.
      • Reduces sound
      • Will not rust or dent
    • Distinctive grille and large, one-piece fender deck complete the styling package.
    Two high-quality headlights give excellent visibility
    Headlights Headlights

    Headlights are standard equipment on all models:

    • Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
    • A headlight position on the ignition switch makes it easy to operate the headlights.
    • The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

    Cyclonic V-twin engine is smooth running and powerful

    22-hp (16.4-kW) engine 22-hp (16.4-kW) engine

    The 22-hp (16.4-kW) V-twin engine used in the Select Series™ X330 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

    • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
    • Large, 44.2-cu in. (724-cc) displacement
      • Plenty of torque helps to get the job done fast.
      • Large displacement engine increases the ability to get an even cut without mowing a second time.
      • Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
    • Electronic ignition for fast starts
    • Cast-iron sleeves for longer engine life
    • Overhead valves for excellent power and fuel economy
    • Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
    • Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
    Cyclonic air filter
    Air filter cover Air filter cover
    Air filter with foam precleaner Air filter with foam precleaner

    Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:

    • Cyclonic design ejects large dirt particles before they contact the filter.
    • Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
    • The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
    Serviceability
    Engine oil check/fill tube and oil-drain hose Engine oil check/fill tube and oil-drain hose
    Oil drain hose Oil drain hose

    Engine oil check and fill tube is conveniently located for easy access. Oil drain hose makes draining oil easy and clean.


    Engine oil filter Engine oil filter

    Replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.


    Debris inspection port covers Debris inspection port covers
    Debris inspection port Debris inspection port

    Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.

    Flywheel alternator

    A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

    • 14-amp charging capacity
    • Regulated to keep the battery at full charge without risk of overcharging
    Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity
    Fuel tank Fuel tank
    Electronic fuel gauge Electronic fuel gauge

    Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

    • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
    • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
      • Located on the left fender
      • Helps eliminate spillage
    • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

    Snow removal is a strength of lawn tractors

    44-in. (112-cm) Front Blade 44-in. (112-cm) Front Blade
    Snow blower, weather enclosure, and chains on an X300 Series Tractor Snow blower, weather enclosure, and chains on an X300 Series Tractor

    An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

    Equipment available for snow removal includes:

    • 44-in. (112-cm) Snow Blower
    • 44-in. (112-cm) Front Blade
    • 48-in. (122-cm) Front Blade (X394 Tractor only)
    • Tire chains or TerraGrip traction belts
    • Weather enclosure (available for all X300 Series, except the X350R)
    • Weights

     

    Serviceability is convenient with easy-open hood

    One-piece hood is easy to open One-piece hood is easy to open
    Service interval decal located under hood Service interval decal located under hood

    The one-piece hood opens easily to permit checking and servicing the engine:

    • Important service points are located within easy reach.
    • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
    Easy-to-service engine fuel and oil filters Easy-to-service engine fuel and oil filters

    The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

     

    Quick response (QR) codes link to owner information web pages
    Example product identification number (PIN) label with QR code Example product identification number (PIN) label with QR code

    John Deere riding lawn mowers are supported by owner information web pages that include links to:

    • Safety and how-to videos
    • Operator’s manuals
    • Parts catalog
    • Maintenance reminder sheets
    • Attachments
    • Warranty statements

    To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

    Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
    Deck-leveling gauge and hex adjusting tool stored under tractor seat Deck-leveling gauge and hex adjusting tool stored under tractor seat
    Exact Adjust access holes Exact Adjust access holes

    A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

    Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

    The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

    • There is no need to reach under the fender deck while making the mower-level adjustment.
    • Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
      • Level the mower deck side to side
      • Set the correct amount of rake (front-to-back deck orientation)
      • Calibrate the cutting height to the cut-height adjusting knob setting
    • Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
      • To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
    Deck-leveling tool placed under deck Deck-leveling tool placed under deck
    Using included ball-hex tool to level mower deck Using included ball-hex tool to level mower deck

    Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

    • Park the tractor on a level surface.
    • Inflate tires to the correct pressure.
    • Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
    Cut height adjusting knob Cut height adjusting knob
    • Set mower cutting-height knob to the correct deck-leveling position.
    • Adjust mower wheels as necessary so they do not contact the ground surface.
    • Remove the onboard deck-leveling gauge that is located under the seat.
    • Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.
      • Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
    • Adjust mower deck front-to-back level, if necessary.
      • Loosen rear nuts equally on each side of front lift rod.
      • Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
      • Tighten rear nuts after adjustment is complete.
    • Return the gauge to its storage position. 

     

    NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

    Controls and display functions are easy to identify and convenient to use

    X350 Tractor mowing X350 Tractor mowing
    Steering wheel and controls (switch turned on to show display) Steering wheel and controls (switch turned on to show display)
    Controls

    The contoured dash has clean, attractive styling and ergonomic controls for easy use:

    • Controls are color coded and labeled with English words for easy identification by the operator.
    • Controls are logically placed and easy to reach.
    • The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
    • The reverse implement option (RIO) switch is a yellow button.
    • The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
    • Cruise control activation is handled by an automotive-style button.
    • Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
      • The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
    • Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
    Display panel
    Display panel Display panel
    Display panel illustration with descriptions Display panel illustration with descriptions

    Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

    • Display features dark-cockpit design to minimize operator distractions.
    • Display is back lit for night visibility.
      • Night visibility is especially useful with snow blower use.
    • Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
    • Electronic fuel gauge provides real-time fuel level information.
      • The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.
    • A tachometer graphically displays engine speed.
      • Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
    • An indicator tells the operator when the PTO is operating.
    • Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
      • Damage can be prevented and repair costs can be reduced by addressing problems early.
    • Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
      • The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
    • Operators are advised if battery voltage is low, normal, or excessive.
    • The service indicator light illuminates to indicate a diagnostic error code is stored.
      • Onboard diagnostics provides trouble codes for use by trained technicians.
        • For example, a technician can test switch functionality and circuit continuity without tools.
    Twin Touch™ foot control
    Twin Touch foot control Twin Touch foot control
    Cruise control Cruise control

    Twin Touch foot pedals control the speed and direction of travel:

    • Automotive-type accelerator control ensures easy operation.
    • Operator can change direction without lifting foot off the platform.
    • Large pedal surface gives superior operator comfort.
    Cruise control

    Cruise control is standard equipment:

    • To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
    • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
    Mower deck height adjustment
    Cut height adjusting knob Cut height adjusting knob

    A rotary dial knob makes adjusting the mower cut height quick and easy:

    • Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
    • Returns the mower deck to the same preset height each time it is lowered
    Storage tray under tractor seat Storage tray under tractor seat
    Exact Adjust tool is used to level mower deck Exact Adjust tool is used to level mower deck

    Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

    • Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.
    Deck-leveling gauge placed under deck Deck-leveling gauge placed under deck

    Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

     

    Foot-pedal lift system
    Foot-pedal lift system Foot-pedal lift system

    Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

    • The easy-to-use raised position lock operates similarly to the park brake lock.
    • The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
    • The mower deck returns to the same preset height each time it is lowered.
    Adjustable lift-assist spring
    Lift-assist spring decals and adjusting bolt Lift-assist spring decals and adjusting bolt
    Close-up of lift-assist spring decal Close-up of lift-assist spring decal

    NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

    • Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.
      • A spring-assist kit is available for other models for use with front equipment.
    • Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).
    • The mower will not be inadvertently locked in the raised position when mowing through ditches.
    • When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.
    Parking brake control
    Parking brake Parking brake

    Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

    The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

    Electric PTO clutch is easy and convenient to use
    Electric PTO switch Electric PTO switch

    The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

    Heavy-duty PTO clutch
    PTO clutch PTO clutch

    The PTO clutch is designed to operate through many on/off cycles.

    RIO
    Reverse implement switch Reverse implement switch
    Mower engagement PTO switch Mower engagement PTO switch
    Using RIO

    CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

    • Carefully check the area around the machine.
    • Disengage the mower before backing up.

    NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

    1. Stop forward travel. Allow attachment to run.
    2. Look down and behind the machine to be sure that there are no bystanders.
    3. Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
      NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
    4. Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
    5. Resume forward travel. The attachment should continue operating.
    6. Repeat procedure to position the machine again.

    Four-year or 300-hour bumper-to-bumper warranty is standard

    An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

    • The warranty is hassle free, with one company handling all the paperwork.
    • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

    *Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location