Degelman Rotary Cutter
Cutting Equipment
Your Preferred Location
7-1/2" Blade Overlap
For a cleaner cut and to prevent trail-behind, we designed a 7-1/2" blade overlap between the center and wing cutting sections to ensure nothing is left uncut.
Over-Sized Gearboxes
Designed with exacting standards for maximum life expectancy. Convenient sight glass to check lubricant level at a glance. Industrial split case design for easy and accurate assembly and gear mesh setting. Highest torque rating for rotary cutter applications worldwide.
High Impact Resistant Steel
The tougher the steel the tougher the deck. Improved impact resistant steel has three to four times the lifespan of standard grade A36, resists rust and shock loading better. As a result, the cutter lasts longer, endures more punishment and retains a higher resale value.
Square Is Better
Why do all impact and socket wrenches use square adaptors? - Torque.
Again, we go a step further. For easy blade replacement and increased resiliency, we use hardened square bolts. Because of the increased surface area, the square blade bolts have a tighter tolerance and a better contact fit than keyed or hex shaped bolts. This prevents the bolts from spinning and wearing out sooner. Because of this smart design, replacing our bolts is truly a one-person job.
Long Lasting 5" Twist Blades
Heavy-duty 5 inch wide, twist blades are longer lasting and more resistant to bending and breaking.
Precision Hitch
Our single bolt clamp hitch is machined and heat-treated from hardened steel to make our hitch superior in quality. Most grease points are designed for easy through-the-head access. Added safety comes into play with our lock up pin connection so one person can do the hook up without worry of hand injury.
Robust Rockshaft
Talk about long life. Our rockshaft is over-sized and overbuilt utilizing an extra-wide boxed strut construction for strength. Add to that our dual lug configuration to prevent torsion stress and you have one serious structure. Unmatched in the industry.
Increased Wing Control
Flow restricted hydraulic fittings allow increased control over the speed that the wing goes up and down, reducing the risk of damage.
Walking Axle Wheels
Our walking axle wheels are the other half of the equation. They add to the reduction of vibrations by dampening fifty per cent of movement and terrain shock. They stabilize the movement to ensure smooth and even cutting.
Rugged Knee Action Suspension
For absorbing and reducing impact the rubber we use is top of the line, self-dampening and UV-protected to ensure the longevity and performance of the entire machine. Plus, our active suspension is held in place by a one and-a-quarter-inch Grade 8 grease-accessible hex bolt.
Maximum Volume Under Deck
Thirteen inches of side depth combined with a smooth underside for cutting and clearing maximum volume of dense growth.
Low Maintenance Tapered Bearing
To reduce wear and tear we've implemented low maintenance tapered bearings in both our walking axles and our optional wing guide wheel assemblies.
SPECIFICATIONS
| Model |
REV1000 |
REV1500 |
| Cutting Height (field position) |
1” to 16” |
1” to 16” |
| Cutting Width (field position) |
10'-4" |
15’ |
| Overall Width (field position) |
11’-8” |
16’ |
| Overall Length (field position) |
16’-6” |
16’-6” |
| Side Depth (field position) |
1’-1” |
1’-1” |
| Overall Height (transport position) |
7’ |
7’ |
| Overall Width (transport/no wheels) |
7’-8” |
8’ |
| Overall Width (transport/with wheels) |
8’-9” |
10’-2” |
| Overall Length (transport position) |
16’-6” |
16’-6” |
| Ground Clearance |
1’-3” |
1’-3” |
| Standard Weight |
5,780 lbs |
5,830 lbs |
| Hitch Weight (field position) |
1,970 lbs |
1,975 lbs |
| Hitch Weight (transport position) |
2,760 lbs |
2,400 lbs |
| Wing Flex |
22° down, 88° up |
| Top Deck (double frame) |
3/16” IPSCO 80 |
| Bottom Deck (double frame) |
3/16” IPSCO 80 |
| Deck Rings |
Standard |
| Side Skirt Thickness |
Up to 7/16” Thick Laminated |
| Wing (skid shoes) |
3/8” x 3” AR400 |
| Weight Stack (skid shoe-REV1000) |
3/4” x 4” Fixed |
| Center Section (skid shoes) |
3/8” x 5-1/2” AR400 |
| Chain Shield (standard) |
Double Row 5/16” GR 30 |
| Chain Shield Cable (option) |
1/4” Cable |
| Recommended/Minimum Tractor PTO |
100/80 HP |
| Tractor to Transfer Gearcase (drivelines 1000 PTO) |
CAT 6 with 80° CV |
| Transfer to Center/Wing Gearcase (drivelines 1000 PTO) |
CAT 5 |
| Driveline Protection |
Preset Friction Torque Limiters |
| Transfer Gearcase (power rating continous/peak) |
200/250 hp |
| Center and Wing Gearcase (power rating continous/peak) |
175/200 hp |
| Wing Lift Hydraulics (standard) |
Single-acting Individual Circuits (w/ Routing for Combined) |
| Brush Cutting Capacity |
4” |
| Blade Overlap |
7-1/2” |
| Center (blade tip speed 1000 PTO) |
17,500 ft/min |
| Wing (blade tip speed 1000 PTO) |
15,950 ft/min |
| Blade Holder (standard) |
3/4” Blade Carrier |
| Standard Milled Edge (blade) |
1/2” x 5” |
| Self Leveling Hitch (standard) |
1-1/4” Precision Clamping System |
| Self Leveling Hitch (option) |
1-1/8” Clevis Hitch |
| Center Suspension |
Walking Axle and Rubber Spring |
| Wing Suspension (standard) |
Single Wheel and Rubber Spring |
| Wing Suspension (option) |
Walking Axle and Rubber Spring |
| Laminated Wheel/Tires (standard) |
5-Bolt 21 x 5.5 |
| Foam Filled Wheel Tires (optional) |
5-Bolt 22 x 6.6 Aircraft |
| Air Filled Wheel/Tires (optional) |
5-Bolt 22 x 6.6 Aircraft |
| Brush Blade (optional) |
1/2” x 4” |
| Shredder Blade Kit (optional) |
1/2” x 4” |
Tapered Bolts. Tight Fit.
It's an engineering fact that two perfectly-machined conical surfaces will centre to each other (a design the automotive industry uses for tie-rods). We applied this thinking to our nuts and bolts. Tapering centers the nut and the bolt, thus eliminating play and reducing wear.
Vibration Control
Vibration is the single largest contributor to metal fatigue, stress-cracking and structural failures. In the design of our rotary cutter, we've integrated a series of vibration dampening systems that collectively absorb the vibrations.
North American Made Solid Steel Splined Drive Train
The REV1500 has been improved to incorporate an end to end Weasler engineered drive train. Weasler's heritage is all about quality, safety and precision manufacturing. Solid high tensile steel spline shafts are unrivalled for torque, shock loads and sliding ability. Rotary cutters put tremendous stress on the drive lines. The REV is protected from the wide angle drive shafts to the heat dissipating preset friction torque limiters. The multi-patented 80° ball and socket constant velocity joint distributes loads evenly, retains lubricant, reduces wear and keeps contaminants out. And for safety the patented articulated guard system maintains full coverage with the mating guard bell.