Description

Models

Engine is powerful and smooth-running V-twin design

A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mowing, mulching, and bagging:

• V-twin cylinder design for greater torque, lower vibration, and improved sound quality
• Electronic ignition for fast starts
• Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
• Cast-iron cylinder liners for longer engine life
• Overhead valves for excellent power and fuel economy
• Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
  • More effective when operating the tractor on an incline
• No-tools oil drain system for servicing convenience
  

   

Fuel tank

• The capacity is 2.4 U.S. gal. (9.1 L).
• The fuel filler opening is conveniently located under the seat. 
  • Filling the tank without spilling is easy.
  • A tethered fuel tank cap is more convenient.
  • The sealed fuel cap helps keep vapors inside the tank.

Instruments and controls are easy to find and convenient to use

Instruments and controls

The contoured dash has clean, attractive styling:

• Controls are color-coded and labeled for easy identification.
• Controls are logically placed and easy to reach.
• The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
• Functional design of the controls provides good appearance and a comfortable feel.

Side-by-side transmission control pedals

Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Cruise control (S120, S130, S160, S170, and S180)

Cruise control is available on the S120, S130, S160, S170, and the S180:

• To engage, lift the cruise lever and hold until the foot is removed from the forward pedal.
• The cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:

• Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
• Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
• The lift handle is shaped for easy use and is out of the way of entering or exiting operators.

Parking brake control

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric power take-off (PTO) clutch is easy and convenient

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Reverse implement option (RIO)

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

• Carefully check the area around the machine.
• Disengage the mower before backing up.

 

NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

 

1. Stop forward travel.
2. Look behind the machine to be sure there are no bystanders.
3. Push and hold in the RIO switch while depressing the reverse pedal slightly for a hydrostatic transmission or moving the transmission shift lever to the rear slot (reverse) for a continuously variable transmission (CVT)/automatic transmission.

 

NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.

 

4. Release the RIO switch and reposition the machine as the machine begins to move rearward.
5. Resume forward travel. The mower or other attachment should continue operating.
6. Repeat procedure to position the machine again.

Fuel tank gauge shows fuel level from the operator's seat

The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:

• Easy to check fuel level
• Convenient location

Snow removal is a strength of lawn tractors

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

• 44-in. (112-cm) Snow Blower
• 46-in. (117-cm) Front Blade
• Tire chains or TerraGrip traction belts
• Weather enclosure
• Weights

 

Serviceability is convenient with an easy-open hood

The one-piece hood opens easily to permit checking and servicing the engine:

• Important service points are located within easy reach.
• A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

The seat tilts up and out of the way to make adding fuel easy.

Quick response (QR) codes link to owner information web pages

John Deere riding lawn mowers are supported by owner information web pages that include links to:

• Safety and how-to videos
• Operator’s manuals
• Parts catalog
• Maintenance reminder sheets
• Attachments
• Warranty registration

To speed access to owner information web pages, a QR code is printed onto a PIN label located near the fuel fill. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN, which enables warranty registration without the need to manually enter the vehicle’s PIN.

Hood will not rust or dent, and includes quality headlights

• Molded-in color material reduces sound and will not rust or dent.
• Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time
• Openings on the side let in plenty of cooling air while keeping the sound level low.
• Two headlights provide good lighting for nighttime operation.

Two-year or 120-hour bumper-to-bumper warranty is included

An exclusive 2-year or 120-hour single-source, bumper-to-bumper warranty* is included for all John Deere 100 Series Tractors.

• The warranty is hassle free, with John Deere handling the service and paperwork.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

The Edge™ cutting system gives superior performance

The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior mowing performance, convenience, and reliability:

• The deep deck design lifts grass for a clean, even cut.
• The smooth underside has no nooks and crannies, preventing grass buildup and evenly dispersing grass clippings.
• The rolled outer edge of the deck provides extra strength and protection.
• Dual-stage E-coat and powder paint coatings provide extra protection from rust.
• Flexible discharge chute minimizes property and mower deck damage.

The 48-in. (122-cm) Edge Mower Deck is a three-spindle design with heavy-duty characteristics:

• The 12-gauge, 0.105-in. (2.7-mm) steel deck provides years of dependable mowing.
• Included three-in-one blades work well for side-discharge, mulching, or bagging.
• The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
• Four mower deck wheels are standard equipment for a smooth mowing job in rolling terrain.
• No tools are required to switch from mulching to side discharge to rear bagging.
• A mulching cover is an optional attachment that can be installed without the use of tools.
• High-performance mulching blades are available to enhance mulching performance.

Mower wash port

A wash port is provided to make cleaning the underside of the mower deck easy:

• A hose connector is included with mower deck.

StarLock™ blade design

The StarLock blade design keeps the blade bolt at the correct torque for easy removal.

Optional blades for difficult mulching or bagging conditions are available.

Optional bagger

A cut-and-throw, 6.5-bu (229-L) bagger is sold separately and comes with bagging blades. Special bagging blades are not required but they can enhance performance.

The bagger kit provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.

Operator station designed for operator comfort and convenience

The operator station is designed for operator comfort and easy operation:

• Controls are positioned where they are easy to reach and use to control the tractor.
• The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
• The seat is positioned to provide the most comfortable operator position.

Controls are easy to see and use:

• Large, three-spoke steering wheel for greater operator comfort and control
• Ignition switch is on the dash for starting ease

Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:

• The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
• Debris-removing channels help keep the footrest area clean and dry.

Operator comfort is enhanced with a 15-in. (38-cm) high-back, two-piece seat with an open back:

• The open-back seat design keeps the operator cooler
• Especially helpful when operating the tractor for extended periods of time
• Easily adjusted forward or rearward while in the seat
• Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height

Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.

The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.

Storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.

NOTE: A storage compartment cover is standard on S120, S130, S160, S170, and S180 Tractors and optional on the S100, S110, and S140.

Fender flares included on the S130 Tractor cover the tires more completely and add style to the tractor.

Hydrostatic transmission gives an infinite choice of ground speeds

A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:

• Automotive-type accelerator controls ensure easy operation.
• Operator can change direction without lifting foot off the platform.
• Large pedal surface gives superior operator comfort.

Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:

• Tuff Torq TLT200 – S100, S110, S120, S130, S140, and S160
• Tuff Torq K46 - S170 and S180

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Frame made of full-length welded steel for reliability

The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:

• Full-length, robotically welded frame design has high-strength steel rails for added strength and long life.
• One-piece, steel fender deck is bolted to the frame.

Cast-iron front axle will not bend

The front axle is constructed of solid cast iron that will not bend:

• Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
• Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
• Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.

Front bumper protects the tractor

The front bumper is included on the S130, S140, S160, S170, and S180. It is available as an optional attachment for the S100, S110, and S120.

• Additional front-end protection
• Attractive, bold style

CargO Mount™ system makes installation of rear bagger and other attachments easy

The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.

Help maintain your mower and lawn with the MowerPlus™ app and connector

Overview

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Benefits

• Engine hours, fuel level, and battery health (as compatible)
• Mowing history with time, distance, area, and speed
• Current day and five-day weather forecast based on location
• Walk-through setup guides
• Expert mowing tips
• Useful attachments for future purchase
• Periodic maintenance reminders
• Safety instructions

 

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

Additional details

MowerPlus connectors (sold separately)

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

 

BUC10510 MowerPlus Hour Meter Connector is for use with:

• Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
• Model year 2015 to 2020 S240 Tractors (serial number -880,000)
• S100, S110, S140, and S220 Tractors

 

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

• All S120, S130, S160, S170, and S180 Tractors
• Model year 2021 and newer S240 Tractors (serial number 880,001-)
• Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

 

BUC10537 MowerPlus Smart Connector is for use with:

• Model year 2016 and newer Select Series X300 and X500 Tractors

 

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

 

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

 

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Specifications

• Additional information - Date collected: 1-Dec-21
• Additional information - Manufacturing location: Greeneville, Tennessee, USA
• Buyer's notes - Notes: Molded-in color material reduces sound, will not rust or dent<br/>Durable primer and powder paint finish<br/>Full-length welded steel frame
• Buyer's notes - Warranty: 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
• Chassis - Cup holder: Yes
• Chassis - Equipment mounting: CargO Mount™ system
• Chassis - Fender deck material: Stamped steel
• Chassis - Fender handles/grips: No
• Chassis - Floor mats: Yes, with debris removing channels
• Chassis - Frame: Full-length welded steel
• Chassis - Front axle: Cast-iron front axle, powdered-metal front wheel bushings
• Chassis - Front tires: 15x6-6
• Chassis - Hood material: Molded-in color material reduces sound, will not rust or dent
• Chassis - Maximum towing capacity: 500 lb<br/>227 kg
• Chassis - Primer/paint: E-coat/powder
• Chassis - Rear tires: 20x8-8
• Chassis - Receiver hitch: No
• Chassis - Service interval decal: Yes
• Chassis - Spindle bushings: No
• Chassis - Storage: Storage tray with optional cover
• Chassis - Weight bracket: Optional rear
• Dimensions - Height: 44 in.<br/>1118 mm
• Dimensions - Overall length: 69.7 in.<br/>1770 mm
• Dimensions - Weight: Mower, no fuel, 468 lb<br/>212 kg
• Dimensions - Wheelbase: 48.9 in.<br/>1242 mm
• Dimensions - Width with mower: 60.8 in.<br/>1544 mm
• Dimensions - Width with mower (deflector raised for storage): 51.7 in.<br/>1313 mm
• Dimensions - Width without mower: 39.2 in.<br/>996 mm
• Electrical system - 12-V outlet: No
• Electrical system - Backup lights: No
• Electrical system - Battery: 12 V<br/>300 CCA
• Electrical system - Charging system: Regulated, 8 amp
• Electrical system - Engine starter: Bendix type
• Electrical system - Headlights: Two standard, incandescent
• Electrical system - Hour meter: Yes
• Electrical system - Rear work lights: No
• Electrical system - Taillights or reflector: No
• Engine - Air cleaner: Cartridge
• Engine - Choke/speed control: Single lever with spring-return on choke
• Engine - Cooling method: Air
• Engine - Cylinders: V-twin
• Engine - Displacement: 44.2 cu in.<br/>724 cc
• Engine - Governor: Mechanical
• Engine - Manufacturer/model: 44N677 (M44)
• Engine - Oil change: No-tools oil drain with replaceable filter
• Engine - Power: 22 hp<br/>16.4 kW
• Engine - Type: Overhead valve, full-pressure lube, oil filter
• Fuel system - Fuel delivery: Pulse pump and carburetor
• Fuel system - Fuel fill opening: Center, 1.75 in.<br/>4.45 cm
• Fuel system - Fuel gauge: Mechanical, viewable from seat
• Fuel system - Fuel tank capacity: 2.4 U.S. gal.<br/>9.1 L
• Fuel system - Fuel tank location: Rear
• Fuel system - Type: Gasoline
• Key Specs - Cutting width: Edge™ mower deck, 48 in.<br/>122 cm
• Key Specs - Engine manufacturer/model: 44N677 (M44)
• Key Specs - Engine power: 22 hp<br/>16.4 kW
• Key Specs - Lift system type: Spring-assisted hand-grip lever
• Key Specs - Oil change: No-tools oil drain with replaceable filter
• Key Specs - Rear tires: 20x8-8
• Key Specs - Transaxle control: Side-by-side pedals
• Key Specs - Transaxle type: TLT200 hydrostatic, two-wheel drive
• Key Specs - U.S. warranty: 2 year/120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
• Lift system - Cut height increments: 0.25 in.<br/>0.64 cm
• Lift system - Hydraulic outlets: No
• Lift system - Mower cut height: 13 positions, 1-4 in.<br/>2.5-10.2 cm
• Lift system - Preset cut height: No
• Lift system - Type: Spring-assisted hand-grip lever
• Mower attachability - Drive system: Single belt
• Mower attachability - Front draft arms: One spring clip
• Mower attachability - Mower wheels rotate: No
• Mower attachability - Rear draft arms: Two spring clips
• Mower attachability - Type: Slide under tractor
• Mower deck - Construction: Stamped steel deck shell
• Mower deck - Cutting width: Edge™ mower deck, 48 in.<br/>122 cm
• Mower deck - Mower deck material: Steel, 12 gauge<br/>0.105 in.<br/>2.7 mm
• Mower deck - Mower drive system: Electric power take-off (PTO) clutch
• Mower deck - Mower level adjustment: Easy-level deck
• Mower deck - Mower wash port: Yes
• Mower deck - Mower wheel adjustment: One bolt
• Mower deck - Mower wheels: Four
• Mower deck - Type: Side discharge
• Optional equipment - Bucket holder: Yes, single bucket
• Optional equipment - Front blade: 46 in.<br/>116.8 cm
• Optional equipment - Front bumper: Included
• Optional equipment - Grass striping: Lawn striping kit
• Optional equipment - Mulching system: Mulch cover
• Optional equipment - Rear bagger: 2-bag, 6.5 bu<br/>229 L
• Optional equipment - Snow blower: Two-stage, 44 in.<br/>111.8 cm
• Optional equipment - Sprayer: Tow-behind, 15 U.S. gal.<br/>56.8 L<br/>Mounted, 15 U.S. gal.<br/>Tow-behind only, 25 U.S. gal.<br/>94.6 L
• Optional equipment - Spreader: Tow-behind only, 125-175 lb<br/>57.7-80 kg
• Optional equipment - Sun canopy: Sun canopy
• Optional equipment - Tow-behind tools: 16
• Optional equipment - Weather protection: Weather enclosure
• Safety - Backup protection: Reverse Implement Option (RIO)
• Safety - Meets ANSI standard: Yes
• Safety - Meets OPEI standard: Yes
• Safety - Safety video: Yes
• Seat - Armrests: No
• Seat - Fore-aft adjustment: While seated, 5.5 in.<br/>14 cm
• Seat - Seat back height: 15 in.<br/>38 cm
• Seat - Seat suspension: Tilt, two coil springs
• Seat - Type: Two piece with open-back
• Steering - Four-wheel steer: Not available on this model
• Steering - Steering wheel: Standard, diameter - 12 in.<br/>30.5 cm
• Steering - Tilt steering wheel: No
• Steering - Turning radius: 18 in.<br/>45.7 cm
• Steering - Type: Sector and pinion with single drag link and tie rod
• Steering - Uncut circle radius: 20 in.<br/>50.8 cm
• Transaxle - Brakes: Internal wet disk
• Transaxle - Control: Side-by-side pedals
• Transaxle - Cruise control: No
• Transaxle - Differential lock: No
• Transaxle - Forward speed: 0-5.5 mph<br/>0-8.9 km/h
• Transaxle - Oil cooler: Fins and fan on transaxle
• Transaxle - Oil filter: Yes, not serviceable
• Transaxle - Reverse speed: 0-3.2 mph<br/>0-5.2 km/h
• Transaxle - Type: Hydrostatic, 2-wheel drive

Features

• Engine: 22 hp*
• Deck: 48-in Edge™ Cutting System
• Warranty: 2 year/120 hour¹
• Transmission: Two Pedal Hydrostatic
• Drive System: 2-wheel drive

Copy Set